Matt's Geronimo

Designs for inboard or outboard power

Moderator: BruceDow

joshuab
Posts: 518
Joined: Sun Apr 26, 2015 4:10 pm
Location: southern oregon coast
Contact:

Re: Matt's Geronimo

Post by joshuab » Tue Jul 17, 2018 9:53 pm

It looks fantastic!
I cut twice and it's still too short :mrgreen:

BillJ
Posts: 113
Joined: Mon Jun 18, 2018 6:05 pm
Location: Southwest Georgia

Re: Matt's Geronimo

Post by BillJ » Wed Jul 18, 2018 4:58 am

Matt!

Looks awesome man! You have to be very pleased at all the progress and results the last month or so.

BillJ

PeterG
Posts: 587
Joined: Mon Dec 03, 2007 7:08 am
Location: Connecticut

Re: Matt's Geronimo

Post by PeterG » Wed Jul 18, 2018 5:23 am

That looks awesome Matt, great progress!
Murphy's Law: Anything that can go wrong, will go wrong.
Griffin's Law: Murphy was an optimist.

User avatar
hoodman
Posts: 1911
Joined: Thu Nov 10, 2011 8:48 am
Location: Lafayette, IN

Re: Matt's Geronimo

Post by hoodman » Wed Jul 18, 2018 5:34 am

Thanks everyone! Two or three more coats are needed but it's coming together.
Matt

Building a Geronimo......!
viewtopic.php?f=2&t=25139

User avatar
mrintense
Posts: 2983
Joined: Thu Jun 10, 2010 11:22 am
Location: Austin, Texas
Contact:

Re: Matt's Geronimo

Post by mrintense » Wed Jul 18, 2018 7:10 am

Looking great Matt!. It's exciting when you get to start having a lot of visual progress happening.
Carl
a.k.a. Clipper

Crafting a classically styled Vera Cruise named "Some Other Time"

Clipper's Vera Cruise Build

neel thompson
Posts: 1257
Joined: Fri Oct 01, 2010 2:33 pm
Location: Collegeville, Pa

Re: Matt's Geronimo

Post by neel thompson » Wed Jul 18, 2018 7:36 am

Will she make it to G-12? Looks great Matt

froberts
Posts: 46
Joined: Wed Jun 29, 2016 3:42 pm
Location: Vancouver, BC, Canada

Re: Matt's Geronimo

Post by froberts » Wed Jul 18, 2018 9:41 am

What a change a coat of paint makes! Looks great Matt, keep it up!
Fraser

User avatar
hoodman
Posts: 1911
Joined: Thu Nov 10, 2011 8:48 am
Location: Lafayette, IN

Re: Matt's Geronimo

Post by hoodman » Wed Jul 18, 2018 11:44 am

Neel, that's the plan! Taking her to the Evinrude dealer tomorrow.

I can't offer any new insight in WR-LPU. I have done the best I can considering the conditions. If I ever buff and polish it will be during the off season. For now, it is what it is.
Matt

Building a Geronimo......!
viewtopic.php?f=2&t=25139

User avatar
hoodman
Posts: 1911
Joined: Thu Nov 10, 2011 8:48 am
Location: Lafayette, IN

Re: Matt's Geronimo

Post by hoodman » Wed Jul 18, 2018 12:15 pm

Here she is with four coats everywhere.
Attachments
IMG_20180718_150429616.jpg
Matt

Building a Geronimo......!
viewtopic.php?f=2&t=25139

User avatar
Bill Edmundson
Posts: 11191
Joined: Wed Nov 23, 2005 6:45 am
Location: Birmingham, AL, USA
Contact:

Re: Matt's Geronimo

Post by Bill Edmundson » Wed Jul 18, 2018 12:30 pm

Matt

Looks Great! Can't wait!

Bill
Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build

User avatar
Jimbob
Posts: 587
Joined: Thu Jul 25, 2013 1:07 pm
Location: Sacramento, CA

Re: Matt's Geronimo

Post by Jimbob » Wed Jul 18, 2018 1:22 pm

Matt,
Looks real nice!
Jim
Jim Neeley
Building a Barrelback in Sacramento, CA
viewtopic.php?f=15&t=28089#p172969

User avatar
mrintense
Posts: 2983
Joined: Thu Jun 10, 2010 11:22 am
Location: Austin, Texas
Contact:

Re: Matt's Geronimo

Post by mrintense » Wed Jul 18, 2018 4:09 pm

Looks like it just waiting to jump out the door and get that outboard! All dressed up and ready to go! :D :D :D
Carl
a.k.a. Clipper

Crafting a classically styled Vera Cruise named "Some Other Time"

Clipper's Vera Cruise Build

JimmY
Posts: 665
Joined: Sat Jul 30, 2016 11:08 am
Location: Brighton, MI

Re: Matt's Geronimo

Post by JimmY » Wed Jul 18, 2018 7:13 pm

Plenty of time to polish it at the end of the season. Looks nice in white.
-Jim
Nothing says poor craftsmanship like wrinkles in your duct tape!

User avatar
hoodman
Posts: 1911
Joined: Thu Nov 10, 2011 8:48 am
Location: Lafayette, IN

Re: Matt's Geronimo

Post by hoodman » Thu Jul 19, 2018 8:08 pm

Thanks, everybody. The boat is at the dealer. I saw the motor in its crate and it looks awesome! Ken, the rigger, has a template and he held that in place while I drilled out the mounting holes. Then I sealed them with some superfast epoxy. Ken seems to be a big fan of RTV sealant but I wanted the holes sealed with a coat of epoxy anyways. I spent at least an hour there and we went over everything we could think of as far as the installation of the motor, controls, and gauges. Can't wait to see that bad boy on the back. The motor is white and red and so is the boat. It won't be long until my hat's backwards at WOT.

They have quite the operation at Tom's Marine in Crawfordsville. They have all manner of BRP products which, I guess, is how a dealership that size survives in an area that doesn't have that much water. Anyways, almost everyone at the place came by to take a look at the boat. Several questioned how many hours I have in it. My standard response is that I have no idea but it's a lot. I don't keep track because this is all just for fun.
Matt

Building a Geronimo......!
viewtopic.php?f=2&t=25139

Hercdrvr
Posts: 719
Joined: Mon May 11, 2015 12:52 pm
Location: McKinney TX

Re: Matt's Geronimo

Post by Hercdrvr » Thu Jul 19, 2018 8:21 pm

Cool stuff!! You went with an E-etc 90hp, right?
Matt B

Post Reply

Return to “Power Boats”