Page 11 of 13

Re: Aussie Gentry

Posted: Fri Jun 02, 2017 10:49 pm
by John R
G/Day got the gold stripe on so now the 3 more coats of varnish
IMG_7147.jpg

IMG_7144.jpg

IMG_7146.jpg

Re: Aussie Gentry

Posted: Sat Jun 03, 2017 3:06 pm
by jenko
looks great :D

Re: Aussie Gentry

Posted: Wed Jun 14, 2017 4:58 pm
by John R
G/Day well weather is very cold here so i have to pick my days for the last coats of varnish on, so i fitted some instruments into the dash and also fitted the bow hook i got from Glen-L..........John
IMG_7154.jpg

IMG_7151.jpg

IMG_7153.jpg
















IMG_7151.jpg

Re: Aussie Gentry

Posted: Sat Jun 17, 2017 4:28 pm
by John R
G/Day got 2 coats of varnish on in a day i will wet rub these coats then wait for a good day and spray the final coats.............John
IMG_7169.jpg

IMG_7168.jpg

IMG_7166.jpg

Re: Aussie Gentry

Posted: Sat Jun 17, 2017 6:37 pm
by JimmY
Smooth!

Re: Aussie Gentry

Posted: Sun Jun 18, 2017 8:53 pm
by Denon Osterman
That is one gorgeous boat! <3 What did you use to get the sides so clear? I saw earlier in the chain that it's Feast Watson, and it looks like you're spraying it...but still, It looks absolutely stunning! Well done for sure, I hope I can get my deck to look half as good.

Re: Aussie Gentry

Posted: Mon Jun 19, 2017 12:31 am
by John R
G/Day yes it is a Feast Watson varnish i sprayed the last 6 coats on, well today good weather i sanded dead smooth and got 2 coats on the hull is finished , now i will let cure for a few weeks then flip the hull bloody ripper ............John
IMG_7195.jpg

IMG_7191.jpg

IMG_7192.jpg

Re: Aussie Gentry

Posted: Fri Jul 07, 2017 12:49 am
by John R
G/Day well it is happening tomorrow we are turning the boat so it will be cheers or tears ha ha, we will sit it on the trailer to see if i have to do mods, then sit it on its cradle for the next 18 months stay tuned............John

Re: Aussie Gentry

Posted: Fri Jul 07, 2017 5:45 am
by mrintense
Congratulations John and good luck.

Re: Aussie Gentry

Posted: Fri Jul 07, 2017 9:15 pm
by John R
G/Day well it is over and went without a hitch had a lot of helpers and we test fitted on the trailer, then transferred to the build cradle ....John
IMG_7265.jpg

IMG_7271.jpg

IMG_7239.jpg

Re: Aussie Gentry

Posted: Fri Jul 07, 2017 9:17 pm
by John R
IMG_7312.jpg

IMG_7328.jpg

IMG_7330.jpg

Re: Aussie Gentry

Posted: Fri Jul 07, 2017 10:19 pm
by vupilot
Fantastic work!

Re: Aussie Gentry

Posted: Fri Jul 07, 2017 10:31 pm
by jenko
congratulations :D

Re: Aussie Gentry

Posted: Sat Jul 08, 2017 3:53 am
by neel thompson
Very nice John..... Now you are almost halfway to the finish line.

Re: Aussie Gentry

Posted: Sat Jul 08, 2017 5:26 am
by Bill Edmundson
John

Look closely at the plans. I believe you see that the clips are outboard at the motor well.

Bill