Page 12 of 13

Re: Aussie Gentry

Posted: Sun Jul 09, 2017 7:50 am
by PeterG
Congratulations on your flip! We are all looking forward to seeing the next steps in your build.

Re: Aussie Gentry

Posted: Tue Jul 18, 2017 11:51 pm
by John R
G/Day thanks all yes fun begins i hope
Bill yes i put the clips outside of the engine bearers at the motor section
IMG_7338.jpg

IMG_7337.jpg

Re: Aussie Gentry

Posted: Mon Aug 07, 2017 12:37 am
by John R
G/Day a few things done installed the rudder and skeg stained and varnished the inside so all sealed now, starting to permanently put the swim step on and putting the spare engine together so as i can fit the mounts and plumbing set the log up wiring etc
IMG_7355.jpg

IMG_7343.jpg

IMG_7346.jpg

Re: Aussie Gentry

Posted: Mon Aug 07, 2017 12:39 am
by John R
IMG_7358.jpg

IMG_7356.jpg

IMG_7357.jpg

Re: Aussie Gentry

Posted: Mon Aug 07, 2017 12:41 am
by John R
IMG_7361.jpg

IMG_7359.jpg

IMG_7360.jpg

Re: Aussie Gentry

Posted: Tue Aug 22, 2017 3:25 pm
by John R
G/Day well swim step is on for good and finished also put the exhaust outlet on and fitted, now making the inlet manifold for the engine this will take 2 40mm DLOE Weber carburetors all fun stuff now ............John
IMG_7389.jpg

IMG_7387.jpg

IMG_7388.jpg

Re: Aussie Gentry

Posted: Tue Aug 22, 2017 3:27 pm
by John R
IMG_7397.jpg

IMG_7393.jpg

IMG_7395.jpg

Re: Aussie Gentry

Posted: Tue Aug 22, 2017 3:27 pm
by DrBryanJ
Swim step looks great John.

Re: Aussie Gentry

Posted: Tue Aug 22, 2017 6:23 pm
by jenko
Great work John

Re: Aussie Gentry

Posted: Tue Aug 29, 2017 3:58 pm
by John R
G/Day well put the dummy engine in to start to line the drive train up and make the engine mounts also got the front deck stringers on and faired.....John
IMG_7407.jpg

IMG_7401.jpg

IMG_7402.jpg

Re: Aussie Gentry

Posted: Tue Aug 29, 2017 4:00 pm
by John R
IMG_7400.jpg

IMG_7409.jpg

IMG_7410.jpg

Re: Aussie Gentry

Posted: Tue Oct 03, 2017 3:11 pm
by John R
G/Day well i got the base ply deck glued and on now the fun begins with the Mahogany and Silver Ash ....John
IMG_7494.jpg

IMG_7490.jpg

IMG_7492.jpg

Re: Aussie Gentry

Posted: Tue Oct 03, 2017 7:33 pm
by Tony Hain
John
You're powering. At this rate you'll need another project soon.

Re: Aussie Gentry

Posted: Thu Oct 05, 2017 5:51 am
by mrintense
John, looks great, really moving now! Next year will be exciting, more cool boats being completed.

Re: Aussie Gentry

Posted: Thu Oct 05, 2017 2:01 pm
by John R
G/Day well Silver Ash king plank is glued on also flat bent 20 mm by 10 mm Mahogany around the gunnel edge, no cracking so i was pretty happy this one will be screwed to hold in place while glue cures then i will remove and plug the rest of the strips (silver ash and mahogany) will be clamped pulled .....John
IMG_7503.jpg

IMG_7495.jpg

IMG_7496.jpg