tug-a-long 16

Designs for inboard or outboard power

Moderator: BruceDow

Post Reply
dannyzapp
Posts: 5
Joined: Thu Aug 11, 2011 6:37 pm
Location: conneaut ohio
Contact:

tug-a-long 16

Post by dannyzapp »

I'm building a tug along 16 ,I'm having a problem with local materials can I use zinic coated screws for my butt joints? only place to get any materials is lows and home depot. i could only find zinic coated or yellow coated zinic,,any suggestions?

User avatar
mrintense
Posts: 3821
Joined: Thu Jun 10, 2010 11:22 am
Location: Austin, Texas
Contact:

Re: tug-a-long 16

Post by mrintense »

If you are looking for Silicon bronze screws you can get them from Glen L. Of course you'll have to wait a bit for them to be delivered as well as pay shipping.
Carl

Crafting a classically styled Vera Cruise

Clipper Boating

dannyzapp
Posts: 5
Joined: Thu Aug 11, 2011 6:37 pm
Location: conneaut ohio
Contact:

Re: tug-a-long 16

Post by dannyzapp »

THANKS!

flordia boy
Posts: 453
Joined: Fri Nov 13, 2009 7:25 pm

Re: tug-a-long 16

Post by flordia boy »

I would not recommend them...get the silicone bronze ones....you'll be sorry if you use the galvanized ones...

Post Reply

Return to “Power Boats”