Klondike Build

Designs for inboard or outboard power

Moderator: BruceDow

User avatar
steveh41
Posts: 747
Joined: Mon Jun 14, 2010 7:16 pm
Location: Catheys Valley, CA
Contact:

Re: Klondike Build

Post by steveh41 »

Hi Chris,

We are making progress tying up loose ends getting ready for transport. All systems are installed but still wrapping up interior finish details and attaching railings and other hardware. May have some pics over the weekend...

Regards,

Steve
The longest journey begins with a single step… then repeat as necessary!

User avatar
vupilot
Posts: 3514
Joined: Wed Apr 15, 2009 7:36 am
Location: Indy
Contact:

Re: Klondike Build

Post by vupilot »

Wow, I got behind following your build and missed the picture of the whole boat! WOW!!! People arent going to believe you built it, good thing its documented!!! I feel so lazy!

User avatar
Bill Edmundson
Posts: 11897
Joined: Wed Nov 23, 2005 6:45 am
Location: Birmingham, AL, USA
Contact:

Re: Klondike Build

Post by Bill Edmundson »

Steve

I can't wait to see the boat in the water! Wish I could be there!

Bill
Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build

User avatar
psychobilly
Posts: 1091
Joined: Wed May 12, 2010 3:07 am
Location: Tomball, TX

Re: Klondike Build

Post by psychobilly »

Poop! Just truck it to Hale’s Bar Marina! Then everyone could Motor down the river to the GOM and through THE canal!!!

User avatar
steveh41
Posts: 747
Joined: Mon Jun 14, 2010 7:16 pm
Location: Catheys Valley, CA
Contact:

Re: Klondike Build

Post by steveh41 »

Yikes Billy! I'm pretty sure that trip would break the bank :lol:

Bill and Chris thanks for your kind words and support... we're actually still about a month out from getting on the road to Richmond. Still plenty to do... trying hard not to rush the finish work but really want to get on the water!

Regards,

Steve
The longest journey begins with a single step… then repeat as necessary!

User avatar
psychobilly
Posts: 1091
Joined: Wed May 12, 2010 3:07 am
Location: Tomball, TX

Re: Klondike Build

Post by psychobilly »

steveh41 wrote:
Wed Jul 24, 2019 9:56 am
Yikes Billy! I'm pretty sure that trip would break the bank :lol:


Steve
It’s only money and they ain’t no U-Hauls going to heaven! :lol:

User avatar
Bill Edmundson
Posts: 11897
Joined: Wed Nov 23, 2005 6:45 am
Location: Birmingham, AL, USA
Contact:

Re: Klondike Build

Post by Bill Edmundson »

Steve

Get as much done, while it's on the "hard", as you can. The sense of urgency goes away when it gets wet.

Bill
Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build

User avatar
steveh41
Posts: 747
Joined: Mon Jun 14, 2010 7:16 pm
Location: Catheys Valley, CA
Contact:

Re: Klondike Build

Post by steveh41 »

Attached a pic of the dinghy first time on the water... marking the waterline; will adjust for load before paint. Still need to build seats and finish off the inside. Will be stealing the outboard from the Tubby Tug...

First time on the water for the dinghy! Red stuff is sawdust to leave a mark on the waterline...
First time on the water for the dinghy! Red stuff is sawdust to leave a mark on the waterline...

Shooting last topsides finish paint this week, everything's masked off & not suitable for pics right now. We've been in touch with the transport guys to get started with route survey to Svendsen's Baymarine in Richmond... final height is 16'6" from keel by raising stern 4 degrees to make pilot house roof horizontal. Every inch adds to the cost!

Will post more as progress permits...

Regards,

Steve
The longest journey begins with a single step… then repeat as necessary!

User avatar
steveh41
Posts: 747
Joined: Mon Jun 14, 2010 7:16 pm
Location: Catheys Valley, CA
Contact:

Re: Klondike Build

Post by steveh41 »

A brief no-pics update...

The transport company I've been working with just notified me they're getting out of the business so I'm scrambling to find a replacement. Guess I should expect bumps in the road with a project that's lasted longer than the average marriage these days! :lol:

Also am finding out that the route from Catheys Valley to Richmond is a two day trip with required escorts so now looking at a closer Stockton boatyard destination for bottom paint and launch. Have been delayed by family and business issues as well but still pedaling! Will post more as progress permits...

Regards,

Steve
The longest journey begins with a single step… then repeat as necessary!

User avatar
mrintense
Posts: 3669
Joined: Thu Jun 10, 2010 11:22 am
Location: Austin, Texas
Contact:

Re: Klondike Build

Post by mrintense »

Setbacks are inevitable I think when a build takes as long as ours have. But the telling thing about this is the builder's refusal to be stopped and to keep going. You're close to the finish line Steve, I know you'll make it.
Carl

Crafting a classically styled Vera Cruise

Clipper Boating

User avatar
steveh41
Posts: 747
Joined: Mon Jun 14, 2010 7:16 pm
Location: Catheys Valley, CA
Contact:

Re: Klondike Build

Post by steveh41 »

Thanks for your support Carl... we're working it out.

Regards,

Steve
The longest journey begins with a single step… then repeat as necessary!

User avatar
Bill Edmundson
Posts: 11897
Joined: Wed Nov 23, 2005 6:45 am
Location: Birmingham, AL, USA
Contact:

Re: Klondike Build

Post by Bill Edmundson »

Steve

We're all following you. I know there is a way to pull this off.

Bill
Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build

User avatar
steveh41
Posts: 747
Joined: Mon Jun 14, 2010 7:16 pm
Location: Catheys Valley, CA
Contact:

Re: Klondike Build

Post by steveh41 »

Thanks Bill... your support is greatly appreciated. We're working on several options.

Regards,

Steve
The longest journey begins with a single step… then repeat as necessary!

hoodman
Posts: 2441
Joined: Thu Nov 10, 2011 8:48 am
Location: Lafayette, IN

Re: Klondike Build

Post by hoodman »

Isn't there a Glen-l trailer plan for this?
Matt

Building a Geronimo......!
viewtopic.php?f=2&t=25139

JimmY
Posts: 992
Joined: Sat Jul 30, 2016 11:08 am
Location: Brighton, MI

Re: Klondike Build

Post by JimmY »

I was thinking a few cases of beer and everyone on the forum shows up to move it. :shock:
-Jim
Nothing says poor craftsmanship like wrinkles in your duct tape!

Post Reply

Return to “Power Boats”