Klondike Build

Designs for inboard or outboard power

Moderator: BruceDow

User avatar
psychobilly
Posts: 1060
Joined: Wed May 12, 2010 3:07 am
Location: Tomball, TX

Re: Klondike Build

Post by psychobilly » Wed Sep 11, 2019 8:46 pm

JimmY wrote:
Wed Sep 11, 2019 7:30 pm
I was thinking a few cases of beer and everyone on the forum shows up to move it. :shock:
Maybe order a truck load of beer! 🍺

Texas Chris
Posts: 4
Joined: Tue Jul 23, 2019 5:01 am
Location: Beaumont, TX

Re: Klondike Build

Post by Texas Chris » Wed Oct 02, 2019 12:02 pm

Use the beer truck to move the boat!

User avatar
Gayle Brantuk
Posts: 1759
Joined: Tue Nov 11, 2003 1:02 pm
Location: San Clemente, CA
Contact:

Re: Klondike Build

Post by Gayle Brantuk » Wed Oct 02, 2019 12:19 pm

Hoodman--the Klondike has a 15-1/2 foot beam and our boat trailer plans are for boats with a beam up to 8-1/2 foot, FYI. Thank you though!

hoodman
Posts: 2245
Joined: Thu Nov 10, 2011 8:48 am
Location: Lafayette, IN

Re: Klondike Build

Post by hoodman » Wed Oct 02, 2019 12:52 pm

Gayle Brantuk wrote:
Wed Oct 02, 2019 12:19 pm
Hoodman--the Klondike has a 15-1/2 foot beam and our boat trailer plans are for boats with a beam up to 8-1/2 foot, FYI. Thank you though!
I know :lol: Just teasing.
Matt

Building a Geronimo......!
viewtopic.php?f=2&t=25139

User avatar
jenko
Posts: 912
Joined: Sat Mar 19, 2011 2:50 am
Location: Pine Mountain . Vic . Australia
Contact:

Re: Klondike Build

Post by jenko » Wed Oct 02, 2019 1:02 pm

Surely enough pilots to airlift it :D

User avatar
steveh41
Posts: 702
Joined: Mon Jun 14, 2010 7:16 pm
Location: Catheys Valley, CA
Contact:

Re: Klondike Build

Post by steveh41 » Wed Oct 02, 2019 7:52 pm

Appreciate the creative input guys... I'd be pleased to raise a glass or two with anyone who wants to make the trip after we get settled at the marina. :wink:

Steve
The longest journey begins with a single step… then repeat as necessary!

User avatar
shep
Posts: 84
Joined: Wed Nov 24, 2010 1:41 pm
Location: Danville CA

Re: Klondike Build

Post by shep » Tue Oct 22, 2019 7:57 pm

Steve, great to see your unbelievable progress on this build. Will you keep her I’m Alameda still? Would love to come visit once your in.

User avatar
steveh41
Posts: 702
Joined: Mon Jun 14, 2010 7:16 pm
Location: Catheys Valley, CA
Contact:

Re: Klondike Build

Post by steveh41 » Wed Oct 23, 2019 7:39 am

Thanks John... we are making the initial transport to Stockton because of cost considerations, so first launch will be on the Sacramento delta. After bottom paint and making sure everything works we'll be moving to our berth in Alameda. We'd be very pleased to have you visit. Right now waiting for transport company to finish the route check... will post some pics of the move, just not sure at this point when it's going to happen.

Regards,

Steve
The longest journey begins with a single step… then repeat as necessary!

User avatar
Bill Edmundson
Posts: 11645
Joined: Wed Nov 23, 2005 6:45 am
Location: Birmingham, AL, USA
Contact:

Re: Klondike Build

Post by Bill Edmundson » Wed Oct 23, 2019 8:06 am

Moving something this size is no small issue! At least it is one state. One permit and one state's laws. I know Steve and the transport company are jumping through hoops! Particularly in California.

Bill
Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build

User avatar
mrintense
Posts: 3351
Joined: Thu Jun 10, 2010 11:22 am
Location: Austin, Texas
Contact:

Re: Klondike Build

Post by mrintense » Sat Oct 26, 2019 9:46 am

Really looking forward to this Steve (as I am sure you are as well!)
Carl
a.k.a. Clipper

Crafting a classically styled Vera Cruise

Clipper's Vera Cruise Build

User avatar
steveh41
Posts: 702
Joined: Mon Jun 14, 2010 7:16 pm
Location: Catheys Valley, CA
Contact:

Re: Klondike Build

Post by steveh41 » Mon Oct 28, 2019 7:42 am

Thanks Carl... still making slow progress.

Steve
The longest journey begins with a single step… then repeat as necessary!

Post Reply

Return to “Power Boats”