Malahini seats

Designs for inboard or outboard power

Moderator: BruceDow

Hercdrvr
Posts: 365
Joined: Mon May 11, 2015 12:52 pm
Location: McKinney TX

Malahini seats

Postby Hercdrvr » Thu Sep 29, 2016 4:53 am

I'm playing around with different seat angles. The seats per the plans feels way too much like a straight up and down church pew. My little wife likes a straight chair and church too but I want more of an F-16 seat position.

Any advice out there,
Matt B
Attachments
IMG_1549.JPG
Back seat angle, too much?

PeterG
Posts: 351
Joined: Mon Dec 03, 2007 7:08 am
Location: Connecticut

Re: Malahini seats

Postby PeterG » Thu Sep 29, 2016 6:31 am

Looks like a great start. I have this in mind for my boat project too. I did a search for the best boat seating ergonomics and a lot of info came back. The most consistent seat design seems to have a 10 degree down angle for the seat and 100 to 115 degree angle of the back to the seat. Here is a decent example for seating design guidelines: http://www.diy-wood-boat.com/Ergonomics.html
The dimensions given look like a great place to start, definitely mock it up and try it out in your boat.
In your picture the seat angle looks good, the angle of the back looks a bit more reclined than 100 degrees angle to the seat. BUT, it is all in what you want, after all that's why you are building a boat instead of buying one...
Murphy's Law: Anything that can go wrong, will go wrong.
Griffin's Law: Murphy was an optimist.

User avatar
DrBryanJ
Posts: 592
Joined: Fri Jul 22, 2011 6:05 am
Location: New Jersey

Re: Malahini seats

Postby DrBryanJ » Thu Sep 29, 2016 8:04 am

peter: when you say 100 -115 degrees. Is that measured from horizontal or from the seat bottom. (110 -125 from horizontal)
Bryan

Building a malahini "Mona Lisa"

My wife said "If I build a boat, she's getting a divorce."

PeterG
Posts: 351
Joined: Mon Dec 03, 2007 7:08 am
Location: Connecticut

Re: Malahini seats

Postby PeterG » Thu Sep 29, 2016 8:44 am

Measured from the seat bottom. Using the guidelines from the web link with the seat back angled at 20 to 25 degrees from the vertical, and the seat bottom angled down 10 degrees, that would make for 100 to 105 degrees angle between the seat bottom and seat back. I would start with the 100 degree angle and vary to what I consider comfortable.
Murphy's Law: Anything that can go wrong, will go wrong.
Griffin's Law: Murphy was an optimist.

User avatar
rbrandenstein
Posts: 817
Joined: Mon Mar 08, 2010 3:51 pm
Location: O'Fallon, MO

Re: Malahini seats

Postby rbrandenstein » Thu Sep 29, 2016 12:05 pm

Here is a diagram of my seats. I am at 96+ degrees, but as I told Matt at G10, the back could have just a little more back tilt. Sounds like 100 degrees would be about right.
Seats.JPG
________________
Bob
Completed Malahini (launched 6/24/2012)
http://bobsboatbuild.blogspot.com/

Hercdrvr
Posts: 365
Joined: Mon May 11, 2015 12:52 pm
Location: McKinney TX

Re: Malahini seats

Postby Hercdrvr » Thu Sep 29, 2016 8:25 pm

Great replies, Bob, nice diagram with measurements and angles. My mock up seat is very close to your dimensions
with an extra 10 degrees recline.

Thanks, Matt

User avatar
gap998
Posts: 371
Joined: Wed May 20, 2015 5:40 pm
Location: Wales, UK

Re: Malahini seats

Postby gap998 » Sat Oct 01, 2016 3:23 pm

I've found this successful in the past. Specs are for lounge seating, but are a good place to start.
Seating Ergonomics.jpg
Gary

Planning a whole fleet, but starting with a Zip...I think.

"Just when you think you've made something idiot-proof, someone builds a better idiot!"

slug
Posts: 1441
Joined: Sat Sep 22, 2007 9:49 am
Location: Colborne ON Can

Re: Malahini seats

Postby slug » Sat Mar 04, 2017 4:40 am

Note that ALL these theoretical specs are dependent on having room to put your feet after the seat is installed. On my Gentry as built and finished to plan (unfortunately!) I have had to constrict the back angle and make the seat shallower (16") in order to have room for my feet! :(
Something to keep in mind when deck framing. I thought I was OK .
It definitely feels like a gentleman's racer now :?

Doug

User avatar
Bill Edmundson
Posts: 10426
Joined: Wed Nov 23, 2005 6:45 am
Location: Birmingham, AL, USA
Contact:

Re: Malahini seats

Postby Bill Edmundson » Sat Mar 04, 2017 6:23 am

This is why I recommend the 10% stretch. In the early '60s, the average man was 5'-8". A pro-football lineman might be 230# to 250#. Today those numbers would be 6'-0" and 350#.

Bill
Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build

slug
Posts: 1441
Joined: Sat Sep 22, 2007 9:49 am
Location: Colborne ON Can

Re: Malahini seats

Postby slug » Sat Mar 04, 2017 9:10 am

Bill; Thanks for confirming I'm an average man (5'8") My wife has questioned this at times, me being a boat builder and all! :lol:

Doug

User avatar
Bill Edmundson
Posts: 10426
Joined: Wed Nov 23, 2005 6:45 am
Location: Birmingham, AL, USA
Contact:

Re: Malahini seats

Postby Bill Edmundson » Sat Mar 04, 2017 9:23 am

Doug

I'm 5'-8" also. We're the average height for a Viking. They were considered giants.

Bill
Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build

User avatar
gap998
Posts: 371
Joined: Wed May 20, 2015 5:40 pm
Location: Wales, UK

Re: Malahini seats

Postby gap998 » Sat Mar 04, 2017 10:25 am

5'8" is giant - It's a good 2" taller than a normal man! :wink: :lol:
Gary

Planning a whole fleet, but starting with a Zip...I think.

"Just when you think you've made something idiot-proof, someone builds a better idiot!"

Moeregaard
Posts: 347
Joined: Mon Dec 03, 2007 11:31 pm
Location: Thousand Oaks, California

Re: Malahini seats

Postby Moeregaard » Sat Mar 04, 2017 1:41 pm

I think we went with 8.0 degrees from vertical on our Zip's seating, and if I were to do it again I would probably increase this to 12--15 degrees. Ours just seems a little too vertical. I would go out to your car, set the seat at some angle everyone likes, and use that as a starting point.

-Mark Shipley
A boat is just a wooden box with no right angles.

User avatar
Bill Edmundson
Posts: 10426
Joined: Wed Nov 23, 2005 6:45 am
Location: Birmingham, AL, USA
Contact:

Re: Malahini seats

Postby Bill Edmundson » Sat Mar 04, 2017 1:48 pm

Mark

That is exactly what I did.

Bill
Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build

User avatar
mrintense
Posts: 2516
Joined: Thu Jun 10, 2010 11:22 am
Location: Austin, Texas
Contact:

Re: Malahini seats

Postby mrintense » Mon Mar 06, 2017 6:54 am

Yeah, I would like to see some of the more informative posts like this get pinned so that they stay within a click away. Good information.
Carl
a.k.a. Clipper

Crafting a classically styled Vera Cruise named "Some Other Time"

Clipper's Vera Cruise Build


Return to “Power Boats”

Who is online

Users browsing this forum: No registered users and 15 guests