Rocky Mountain Monte Carlo

Designs for inboard or outboard power

Moderator: BruceDow

tysman52
Posts: 91
Joined: Thu Oct 18, 2012 1:17 pm
Location: Salt Lake City, Utah

Re: Rocky Mountain Monte Carlo

Post by tysman52 » Wed Sep 05, 2018 4:03 pm

Forgot to post some interior pics. I found interior pics to be as helpful to see during my build...
JT
Attachments
IMG_1326.JPG
IMG_1331.JPG
IMG_1320.JPG

tysman52
Posts: 91
Joined: Thu Oct 18, 2012 1:17 pm
Location: Salt Lake City, Utah

Re: Rocky Mountain Monte Carlo

Post by tysman52 » Wed Sep 05, 2018 4:04 pm

Sky Pylon held strong!
Attachments
IMG_1325.JPG
IMG_1324.JPG

tysman52
Posts: 91
Joined: Thu Oct 18, 2012 1:17 pm
Location: Salt Lake City, Utah

Re: Rocky Mountain Monte Carlo

Post by tysman52 » Wed Sep 05, 2018 4:09 pm

Had to cut away engine hatch framing to squeeze the 6.0L in there. In hindsight if I would have thought through the angles and designs earlier I would have been able to sit it down further to the keel but it works. I found it hard at the stage of drilling the shaft hole to look so far ahead to the exact engine/transmission I would be buying to know where the ideal position would be for the strut and shaft hole...I didn't decide on the engine/transmission until about 2 years after I drilled the prop shaft hole. But if you can decide early, you may be able to better maximize the space in your engine box
JT
Attachments
IMG_1323.JPG
IMG_1328.JPG
IMG_1327.JPG

Post Reply

Return to “Power Boats”