Neel's Palm Beach 22 build

Designs for inboard or outboard power

Moderator: BruceDow

User avatar
JoeM
Posts: 159
Joined: Wed Sep 20, 2017 3:32 pm
Location: Santa Clarita, CA
Contact:

Re: Neel's Palm Beach 22 build

Postby JoeM » Tue Dec 19, 2017 7:42 am

Looks good! Still looking for my "like" or "+1" button since I have nothing to add, just admiring your work.
Check out my project and blog! http://fv-escape-hatch.com/project

neel thompson
Posts: 1001
Joined: Fri Oct 01, 2010 2:33 pm
Location: Collegeville, Pa

Re: Neel's Palm Beach 22 build

Postby neel thompson » Wed Dec 27, 2017 5:59 am

Six of nine frames encapsulated with two coats of epoxy resin and transom with three coats. I only coated the surfaces that will not be glued to something else later on. Now on to warmer weather till March. Happy New Year everyone..... Neel
Attachments
20171227_074249.jpg
20171227_074305.jpg
20171227_074329.jpg

JimmY
Posts: 545
Joined: Sat Jul 30, 2016 11:08 am
Location: Brighton, MI

Re: Neel's Palm Beach 22 build

Postby JimmY » Wed Dec 27, 2017 8:00 am

Looking good.
-Jim
Nothing says poor craftsmanship like wrinkles in your duct tape!

TomB
Posts: 129
Joined: Wed Jan 18, 2017 4:07 pm
Location: Holland, MI

Re: Neel's Palm Beach 22 build

Postby TomB » Wed Dec 27, 2017 12:16 pm

Nice work Neel. Looking forward to your next installment in March. Tom

footer
Posts: 7
Joined: Wed Jan 24, 2018 6:28 am
Location: Plainwell MI

Re: Neel's Palm Beach 22 build

Postby footer » Wed Feb 07, 2018 7:57 am

Hey Neel; You go man. I've dreamed of building the Palm Beach for years and finally I purchased the same plans you got. I got the digital plans and they cost me $250 for them to be printed on paper. After several months of deliberating, I finally chose to hold on to them and bought the Malahini plans and am building that as my first boat. Glad i did.
So, i will be interested in seeing how your build goes. Good luck. I hope I can build one in the future.
:)
Tom

User avatar
Bill Edmundson
Posts: 10554
Joined: Wed Nov 23, 2005 6:45 am
Location: Birmingham, AL, USA
Contact:

Re: Neel's Palm Beach 22 build

Postby Bill Edmundson » Wed Feb 07, 2018 8:11 am

Tom (footer)
I think you've made a wise decision. The PB is not a first timer boat. Neel is an excellent builder for sure. The Malahini is a good choice. We had several at the Gathering (You should come.). They are nice looking and run great.

Bill
Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build

neel thompson
Posts: 1001
Joined: Fri Oct 01, 2010 2:33 pm
Location: Collegeville, Pa

Re: Neel's Palm Beach 22 build

Postby neel thompson » Wed Feb 07, 2018 10:25 am

Tom,,,, I also am happy you chose to build the Malahini first. You could probably build one of Glen-L's inboards with no problems using their plans, but the plans for the PB 22 are very hard to figure out without some instructions. I am sure I will be referring to my Gentry plans and instructions many times as I progress. I have been in Florida since 1/1 and have had a lot of time to study the plans. So much is not there!! For instance, the CB or CG of the boat is not shown anywhere. The "down angle" and drop for the strut, the rudder placement, and the method used to attach the frames to the stringers are not there either along with many other things that I need to know. My head hurts !!! So I wish you the best of luck with your build and as Bill requested, we hope to see you in September in TN..... Neel

User avatar
Bill Edmundson
Posts: 10554
Joined: Wed Nov 23, 2005 6:45 am
Location: Birmingham, AL, USA
Contact:

Re: Neel's Palm Beach 22 build

Postby Bill Edmundson » Wed Feb 07, 2018 10:32 am

Tom

And, DISTANCE is NO excuse :!: We've had people come from Australia and New Zealand :!: :lol: And, they come back.

Bill
Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build

footer
Posts: 7
Joined: Wed Jan 24, 2018 6:28 am
Location: Plainwell MI

Re: Neel's Palm Beach 22 build

Postby footer » Thu Feb 08, 2018 9:26 am

Thanks. I would love to come to one of these boat shows as well as I have friends and family there. It's also when we go to the keys. We will see.

tysman52
Posts: 57
Joined: Thu Oct 18, 2012 1:17 pm
Location: Salt Lake City, Utah

Re: Neel's Palm Beach 22 build

Postby tysman52 » Sat Feb 10, 2018 11:10 pm

Frames are looking good! You can imagine the lines with them all stacked up!

User avatar
Jimbob
Posts: 377
Joined: Thu Jul 25, 2013 1:07 pm
Location: Sacramento, CA

Re: Neel's Palm Beach 22 build

Postby Jimbob » Fri Feb 16, 2018 4:46 pm

Hi Neel!
Just working in my office and noticed that my calendar is something you might appreciate.
Jim
Attachments
20180216_152734.jpg
Jim Neeley
Building a Barrelback in Sacramento, CA
viewtopic.php?f=15&t=28089#p172969

User avatar
mrintense
Posts: 2548
Joined: Thu Jun 10, 2010 11:22 am
Location: Austin, Texas
Contact:

Re: Neel's Palm Beach 22 build

Postby mrintense » Wed Feb 21, 2018 1:31 pm

Cool beans Neel,

Bet it's hard to have to wait until March! Looking really good though.
Carl
a.k.a. Clipper

Crafting a classically styled Vera Cruise named "Some Other Time"

Clipper's Vera Cruise Build


Return to “Power Boats”

Who is online

Users browsing this forum: No registered users and 13 guests