MI Malahini Build, Post Flip.

Designs for inboard or outboard power

Moderator: BruceDow

footer
Posts: 296
Joined: Wed Jan 24, 2018 6:28 am
Location: Plainwell MI

Re: MI Malahini Build, Post Flip.

Post by footer » Mon Jun 10, 2019 4:59 am

Torch lake in Michigan is one of the bluest inland lakes in the world. On the south end is a Restaurant/bar called "Dockside". This stern is on the front of the bar. I just thought I'd share it with you guys. I thought it was pretty cool.
Attachments
Dockside restaurant on the south end of Torch lake Michigan.
Dockside restaurant on the south end of Torch lake Michigan.

footer
Posts: 296
Joined: Wed Jan 24, 2018 6:28 am
Location: Plainwell MI

Re: MI Malahini Build, Post Flip.

Post by footer » Mon Jun 17, 2019 4:24 am

I finally got some time to work on the Mistress again, only to suffer a pinched nerve in my left shoulder, which has rendered my left arm about 60% useless. But, I still managed to get a few things accomplished.
I got my cockpit trim installed and my top deck sanded and my final finish coat applied.
My windshield frames are at Dave's Glass getting the safety glass installed.
My rear bench seat boards are at the upholsterers getting upholstered.
My engine is done and I will be pulling the boat over to Terry's to get it installed on Tuesday.
Hopefully by next week, the windshield, seats, and carpet, will be installed and the motor will be all hooked up and ready to go.
Attachments
Trim on, finish done, gauges in, steering in.
Trim on, finish done, gauges in, steering in.
final finish coat
final finish coat

Biss
Posts: 217
Joined: Fri Apr 27, 2018 1:11 pm
Location: Camden, AR

Re: MI Malahini Build, Post Flip.

Post by Biss » Mon Jun 17, 2019 4:46 am

Looking really good. You are almost ready for the water!

PeterG
Posts: 703
Joined: Mon Dec 03, 2007 7:08 am
Location: Connecticut

Re: MI Malahini Build, Post Flip.

Post by PeterG » Mon Jun 17, 2019 5:56 am

Looks great! All coming together nicely and seems ashort time and you'll be on the water.
Murphy's Law: Anything that can go wrong, will go wrong.
Griffin's Law: Murphy was an optimist.

footer
Posts: 296
Joined: Wed Jan 24, 2018 6:28 am
Location: Plainwell MI

Re: MI Malahini Build, Post Flip.

Post by footer » Wed Jun 19, 2019 3:15 am

Got my engine. 60's model 65 hp Mercury. Very happy with the work Terry did on it. The only downside to it is now I have to use a ladder to get in and out of the boat to work in it now. lol
Attachments
Newly rebuilt engine. 60's model 65 hp Mercury.
Newly rebuilt engine. 60's model 65 hp Mercury.
Newly rebuilt engine mounted on the boat. 60's model 65 hp Mercury
Newly rebuilt engine mounted on the boat. 60's model 65 hp Mercury
Newly rebuilt engine mounted on the boat. 60's model 65 hp Mercury.
Newly rebuilt engine mounted on the boat. 60's model 65 hp Mercury.

User avatar
mrintense
Posts: 3408
Joined: Thu Jun 10, 2010 11:22 am
Location: Austin, Texas
Contact:

Re: MI Malahini Build, Post Flip.

Post by mrintense » Wed Jun 19, 2019 4:09 am

Great looking engine. I know what you mean about having to use a ladder to get in. I am delaying putting in my motorwell as long as possible so that I can continue to step in over the transom cutout.
Carl
a.k.a. Clipper

Crafting a classically styled Vera Cruise

Clipper's Vera Cruise Build

PeterG
Posts: 703
Joined: Mon Dec 03, 2007 7:08 am
Location: Connecticut

Re: MI Malahini Build, Post Flip.

Post by PeterG » Thu Jun 20, 2019 6:02 pm

What a great looking set up, can't wait to see it in the water and hear how it performs :D
Murphy's Law: Anything that can go wrong, will go wrong.
Griffin's Law: Murphy was an optimist.

footer
Posts: 296
Joined: Wed Jan 24, 2018 6:28 am
Location: Plainwell MI

Re: MI Malahini Build, Post Flip.

Post by footer » Mon Jun 24, 2019 11:12 am

Front view.
Attachments
Front view of my engine.
Front view of my engine.

Sarnian
Posts: 147
Joined: Fri Jul 27, 2018 10:58 am
Location: Montgomery County, Maryland

Re: MI Malahini Build, Post Flip.

Post by Sarnian » Tue Jun 25, 2019 12:50 pm

Looks absolutely fantastic.....

User avatar
Gayle Brantuk
Posts: 1765
Joined: Tue Nov 11, 2003 1:02 pm
Location: San Clemente, CA
Contact:

Re: MI Malahini Build, Post Flip.

Post by Gayle Brantuk » Tue Jun 25, 2019 3:06 pm

Footer--very beautiful build. I love that you've also done your own metal work too as that makes it extra special. Plus, you do nice work! Thank you for sharing your experience with us...

footer
Posts: 296
Joined: Wed Jan 24, 2018 6:28 am
Location: Plainwell MI

Re: MI Malahini Build, Post Flip.

Post by footer » Wed Jun 26, 2019 5:10 am

Thanks Guys and Gayle. We all pour our hearts and souls into our boats and hope for the best results.
After three trips to the Secretary of State, I finally got my Registration and VIN number. First and most important, I had to produce all my receipts for building the boat. They then taxed me on anything I purchased online that I didn't pay taxes on.
The VIN is on paper only, now I have to get a plate engraved and install it on the boat.

Biss
Posts: 217
Joined: Fri Apr 27, 2018 1:11 pm
Location: Camden, AR

Re: MI Malahini Build, Post Flip.

Post by Biss » Fri Jun 28, 2019 7:05 am

Footer, that is a great looking engine! Can't wait to see the pictures from your first launch!

User avatar
mrintense
Posts: 3408
Joined: Thu Jun 10, 2010 11:22 am
Location: Austin, Texas
Contact:

Re: MI Malahini Build, Post Flip.

Post by mrintense » Fri Jun 28, 2019 7:33 am

Yeah, I dread the whole registration thing and paying taxes. Money grubbers!!
Carl
a.k.a. Clipper

Crafting a classically styled Vera Cruise

Clipper's Vera Cruise Build

JimmY
Posts: 852
Joined: Sat Jul 30, 2016 11:08 am
Location: Brighton, MI

Re: MI Malahini Build, Post Flip.

Post by JimmY » Fri Jun 28, 2019 9:39 am

Did they take all your receipts? I was disappointed when they said they needed the originals, since I wanted to be able to save these. But I was pleasantly surprised several months later when a big envelop came from the MI S.O.S. and they had returned all my receipts.

Not sure why you had to report/pay tax on the online receipts, aren't these covered under "use tax" on your income tax returns? Lucky for me, I bought all of the materials and supplies for my boat locally! :D
20190627_184620[1].jpg
-Jim
Nothing says poor craftsmanship like wrinkles in your duct tape!

TomB
Posts: 662
Joined: Wed Jan 18, 2017 4:07 pm
Location: Holland, MI

Re: MI Malahini Build, Post Flip.

Post by TomB » Fri Jun 28, 2019 10:09 am

JIM! That can needs a coaster.

Post Reply

Return to “Power Boats”