Finished The Bo-Jest!!

Designs for inboard or outboard power

Moderator: BruceDow

Post Reply
Jones
Posts: 81
Joined: Mon Nov 17, 2003 11:22 am
Location: Idaho

Finished The Bo-Jest!!

Post by Jones » Mon Apr 14, 2008 3:04 pm

Quite a feeling to do the last bit of dusting and buffing. It's been a long five years (nearly).

Pictures

... adding more pictures.
Avoid Haste.

User avatar
leakcheck
Posts: 2950
Joined: Mon Nov 17, 2003 3:01 pm
Location: Lander Wyoming

Post by leakcheck » Mon Apr 14, 2008 3:58 pm

And by the looks of things it was worth every last day !!! That is very very very impressive...I cannot wait to see it wet.

When will you be launching for the first time ? Or have you already ?

You can probably make it out to California for the west coast gathering !!!

Steve

User avatar
Bill Edmundson
Posts: 11597
Joined: Wed Nov 23, 2005 6:45 am
Location: Birmingham, AL, USA
Contact:

Post by Bill Edmundson » Mon Apr 14, 2008 4:43 pm

:D Looks Great! It will be lots of fun.

I that a 2 GM Yanmar?

Bill
Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build

C4thprimeau
Posts: 5
Joined: Mon Mar 24, 2008 11:28 am
Location: Southwestern Ontario

Post by C4thprimeau » Mon Apr 14, 2008 5:04 pm

WOW! You did a fantastic job, congratulations.
It's not a chance unless you take it!

Jones
Posts: 81
Joined: Mon Nov 17, 2003 11:22 am
Location: Idaho

Post by Jones » Mon Apr 14, 2008 5:52 pm

Bill Edmundson wrote::D Looks Great! It will be lots of fun.

I that a 2 GM Yanmar?

Bill
Yes, good eye.
Avoid Haste.

User avatar
Bill Edmundson
Posts: 11597
Joined: Wed Nov 23, 2005 6:45 am
Location: Birmingham, AL, USA
Contact:

Post by Bill Edmundson » Mon Apr 14, 2008 6:49 pm

I have a 1GM in my sailboat. Great choice for your boat.

Bill
Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build

gregggrundon
Posts: 389
Joined: Fri Apr 28, 2006 1:48 am
Location: Kwajalein

Beautiful

Post by gregggrundon » Wed Apr 16, 2008 2:02 am

Jones!,

Simply beautiful.

Great wood work.


Beautiful boat!

Have fun.

Gregg
Jolly Roger 30'(Extended)
Marshall Islands, R. M. I.

Amm
Posts: 178
Joined: Thu Jun 01, 2006 9:54 am
Location: Utah

Post by Amm » Wed Apr 16, 2008 7:24 am

Very nice and congratulations.

It looks too good to be used. Maybe donate it to a boat museum? Na.

When is the maiden voyage?

User avatar
Bruce T.
Posts: 169
Joined: Sun Feb 27, 2005 2:52 pm
Location: Almonte, Ontario, Canada

Post by Bruce T. » Wed Apr 16, 2008 7:51 am

Very nice !!!
You have done a supurb job. The photos are great but there doesn't seem to be any of the finished boat.

Don't forget to post some photos of her in the water and maybe a video on Youtube.

Bruce.

Jones
Posts: 81
Joined: Mon Nov 17, 2003 11:22 am
Location: Idaho

Post by Jones » Wed Apr 16, 2008 11:25 am

Thanks for the kind responses.

It's amazing that in a 30' shop it's nearly impossible to fit the boat into any reasonable photograph. I'm in the process of building the trailer (3800 series) and when done I'll load the boat and head for water... then a proper photo shoot can be done and entered into the Glen-L pages.

MJ
Avoid Haste.

trunnel
Posts: 3
Joined: Fri Apr 18, 2008 11:09 am

Post by trunnel » Fri Apr 18, 2008 11:37 am

WOW!!!
Congratulations and good on you.
"There is nothing- absolutely nothing-
half so much worth doing
as simply messing about in boats."

Post Reply

Return to “Power Boats”