Shortening a Monte Carlo

Questions about modifying a design

Moderators: ttownshaw, billy c

User avatar
wingridr
Posts: 26
Joined: Mon Sep 15, 2014 12:31 pm
Location: St. Michael, MN

Shortening a Monte Carlo

Postby wingridr » Sun Sep 21, 2014 8:50 pm

Hello all,

I am looking through plans, and really like most everything about the Monte Carlo...except the length. Seems to be a pretty big boat.

I have seen a fair number of posts about extending a hull, but haven't seen to many on making them a bit shorter. I see that it is said that it can be shortened 10% by re-spacing the frames from the aft end of the stem to the transom a proportional amount. Being the newbie that I am, I am not totally clear of how much this would really be, how long would a Monte be in its shortest length? Would it really be 29.6" shorter?

Does this affect anything as far as building it, or following the plans?

Thanks for any help!

Return to “Design Modifications”

Who is online

Users browsing this forum: No registered users and 1 guest