Bullet jet

Questions about modifying a design

Moderators: ttownshaw, billy c

Post Reply
flabio
Posts: 20
Joined: Sun Dec 30, 2007 7:41 pm

Bullet jet

Post by flabio » Sun Feb 10, 2008 8:07 pm

Has anyone tried to build a 12ft bullet with a jetski motor? Can the outboard plan be re drawn to accomadate? I found an outstanding deal on a 1100cc jetski motor and pump.

goodwyrd
Posts: 55
Joined: Fri Aug 03, 2007 10:02 pm
Location: Vadnais Heights MN

Post by goodwyrd » Mon Jul 21, 2008 5:45 pm

I thought about it. I'm in the middle of building the bullet now. It should work as long as you can build the right stringers for the motor. you will also probably have to re-design the deck in the back because its a very shallow boat in the back (no more than 2 feet from top to keel) it would be pretty tight in there with a jetski motor.

I'd say go for it! it could be really great!
Take your time...the time it takes to fix your "shortcuts" ends up twice as long as if you'd done it right in the first place!

Post Reply

Return to “Design Modifications”