Dyno Jet [Building started at 10-05-2012]

About using jet ski motors to power small boats

Moderator: Bill Edmundson

Posts: 27
Joined: Tue Sep 04, 2012 1:19 am
Location: The Netherlands

Re: Dyno Jet [Building started at 10-05-2012]

Post by Speedy » Tue Jul 02, 2013 1:59 am

Fourth Layer applied, its shiny now :) I will let this dry for 2 days and then apply the fifth layer with no sanding between it. Dependent of the result i will wet sand that layer with 600 and apply the final layer. ( I hope its not necessary)

In real the color is a little darker then on the pictures
Greetings Paul

User avatar
Posts: 1521
Joined: Thu Feb 25, 2010 10:34 am
Location: ATL Burbs and Lake Chatuge, GA

Re: Dyno Jet [Building started at 10-05-2012]

Post by jeffh » Tue Jul 02, 2013 5:26 am

That is going to be a nice boat. Congratulations. By the way, I see you are in the Netherlands. I was just in Amsterdam last week. There are lots of old wooden boats around there.
I wake up with a 16ft woody every morning :)
Video: http://www.youtube.com/watch?v=534DBtp1Cnc
Website: https://sites.google.com/site/2011malahini/

User avatar
Gayle Brantuk
Posts: 1765
Joined: Tue Nov 11, 2003 1:02 pm
Location: San Clemente, CA

Re: Dyno Jet [Building started at 10-05-2012]

Post by Gayle Brantuk » Tue Jul 02, 2013 9:19 am

Beautiful work, Speedy! Thanks for posting such nice photos...

Post Reply

Return to “Jet Ski Power”