Another Jet Squirt is born.

About using jet ski motors to power small boats

Moderator: Bill Edmundson

fourspeedfish
Posts: 22
Joined: Fri May 04, 2012 2:39 pm
Location: Motor City, Michigan

Re: Another Jet Squirt is born.

Postby fourspeedfish » Wed Dec 11, 2013 3:51 pm

Today i epoxied the chines. Not really 100 percent happy with them, but i was tired of messing with them and i think they are real close. I may have to add some material to them up front, as a lot of others have done. No big deal. So far i have 53 hours into the build.
Time to start the super fun task of fairing. :D

fourspeedfish
Posts: 22
Joined: Fri May 04, 2012 2:39 pm
Location: Motor City, Michigan

Re: Another Jet Squirt is born.

Postby fourspeedfish » Sun Jun 22, 2014 9:54 am

Finally after a long winter i am back working on the boat. Sides are on and the bottom is fitted waiting to be put on.
Attachments
101_1845.JPG

fourspeedfish
Posts: 22
Joined: Fri May 04, 2012 2:39 pm
Location: Motor City, Michigan

Re: Another Jet Squirt is born.

Postby fourspeedfish » Sun Jun 22, 2014 9:58 am

I did a premature flip today so i can start fitting the ski engine.
Attachments
101_1848.JPG

User avatar
Gayle Brantuk
Posts: 1562
Joined: Tue Nov 11, 2003 1:02 pm
Location: Bellflower, CA
Contact:

Re: Another Jet Squirt is born.

Postby Gayle Brantuk » Tue Jun 24, 2014 8:19 am

Very nice! Thanks for the updates...

User avatar
John B
Posts: 530
Joined: Mon Feb 11, 2008 11:07 am
Location: Bellflower, CA
Contact:

Re: Another Jet Squirt is born.

Postby John B » Tue Jun 24, 2014 8:41 am

Micah,

Great that you're posting here in the Forum.

Why don't you add all your build photos to the Customer Photo Galleries on our website? That's where most folks go to see photos of the boats people are building/enjoying...

It's really quite easy; just see the instructions at http://www.glen-l.com/phpBB2/viewforum.php?f=61 or you can email them to me in the form of jpegs at John@Glen-L.com

Many, many more people will enjoy your photos by putting them in the Gallery section we've provided just for folks like you.

Thanks!

John B

P.S. You can even have your own blog (online diary) of your build utilizing your photos and story - just go to the same area referenced above and you'll see how easy it is!
Democracy is 2 wolves and a lamb voting as to what to have for lunch.
Liberty is a well-armed lamb contesting the result of the vote.

fourspeedfish
Posts: 22
Joined: Fri May 04, 2012 2:39 pm
Location: Motor City, Michigan

Re: Another Jet Squirt is born.

Postby fourspeedfish » Tue Jun 24, 2014 11:16 am

i will look into it. Thanks

fourspeedfish
Posts: 22
Joined: Fri May 04, 2012 2:39 pm
Location: Motor City, Michigan

Re: Another Jet Squirt is born.

Postby fourspeedfish » Tue Sep 02, 2014 9:33 am

I finally got the bottom panels on and i think i am ready to start mixing some fairing compound. i plan to paint the sides and bottom so i would like to get it as laser strait as possible.
Attachments
101_1928.JPG
101_1945.JPG

User avatar
BulldogBoater
Posts: 498
Joined: Wed Jan 16, 2008 9:16 pm
Location: Wilson, North Carolina
Contact:

Re: Another Jet Squirt is born.

Postby BulldogBoater » Sun Sep 21, 2014 5:22 pm

With a 720 in a Squirt, it's going to be a little screamer - PURE adrenaline rush!

Very nice build.

KB
"I'm not trying to get it perfect. I'm trying to get it finished!"
www.tubbytug.com


Return to “Jet Ski Power”

Who is online

Users browsing this forum: No registered users and 3 guests