Help finding Jet Ski plans

About using jet ski motors to power small boats

Moderator: Bill Edmundson

Mick87
Posts: 22
Joined: Wed Nov 25, 2015 11:24 am
Location: Sheffield, England (UK)

Help finding Jet Ski plans

Postby Mick87 » Wed Dec 02, 2015 8:20 am

Hi all!

Ive been searching the forums and the web site for a good 2 weeks now, Im starting my squirt build soon, but i decided on doing it with the Jet Ski engine or Sea Doo instead of an out board.

I came across a page which I can't remember if it was on the website or the forum of some mod plans for re cutting the transom and modding the back of the squirt for fixing the jet ski engine. Could any point me in the right direction as to were this link is?

Ive searched for so many different thins on the website and forum, I accidentally stumbled upon that thread and forgot to bookmark it on my computer DOH! :lol: and now I can't find it lol

I have some good blogs saved on a few jet powered Squirts which are going to be a fantastic help. But I'm just stuck on finding that one thread I stumbled across on how to re cut the transom to fit the engine :roll:

Mick87
Posts: 22
Joined: Wed Nov 25, 2015 11:24 am
Location: Sheffield, England (UK)

Re: Help finding Jet Ski plans

Postby Mick87 » Wed Dec 02, 2015 9:46 am

Success! :mrgreen:

I found the link after an hour or two of searching. I will leave the link below incase any other new boat builders needs this assistance

http://www.glen-l.com/jet-jon/

User avatar
Gayle Brantuk
Posts: 1580
Joined: Tue Nov 11, 2003 1:02 pm
Location: Bellflower, CA
Contact:

Re: Help finding Jet Ski plans

Postby Gayle Brantuk » Wed Dec 02, 2015 10:21 am

Glad you found it!

Mick87
Posts: 22
Joined: Wed Nov 25, 2015 11:24 am
Location: Sheffield, England (UK)

Re: Help finding Jet Ski plans

Postby Mick87 » Wed Dec 02, 2015 11:20 am

Thanks Gayle :mrgreen:

KnH
Posts: 5
Joined: Sun Jul 03, 2011 9:54 am

Re: Help finding Jet Ski plans

Postby KnH » Wed Dec 02, 2015 6:55 pm

The squirt is a flat bottom hull and Jet and flat bottoms usually don't play well together.
I would look at the dyno jet , stitch and glue will be a lot faster and have some V built into there hulls.

But this is from someone who has a set of TNT plans collecting dust.
and a 4 cycle jetski in the garage waiting for me.

Here is another place to gets lots of jetski boat info from in there projects section
http://www.nzjetboating.com/yabbse/index.php

User avatar
vupilot
Posts: 3343
Joined: Wed Apr 15, 2009 7:36 am
Location: Indy
Contact:

Re: Help finding Jet Ski plans

Postby vupilot » Wed Dec 02, 2015 7:23 pm

You might take a look at Kevins jet Squirt build site if you haven't yet. http://tubbytug.com/SquirtMotor.html


Return to “Jet Ski Power”

Who is online

Users browsing this forum: No registered users and 1 guest