New member from oregon

Here is where we get to welcome all new members.
New members please include your location - Other members close to you may be of great help in locating materials and other needs.

Moderator: Bill Edmundson

joshuab
Posts: 408
Joined: Sun Apr 26, 2015 4:10 pm
Location: southern oregon coast
Contact:

Re: New member from oregon

Postby joshuab » Tue Jun 30, 2015 8:50 pm

Removed the building form and started fairing on the sheer.
Attachments
20150628_101244.jpg
Looking forward
I cut twice and it's still too short :mrgreen:

ian bell
Posts: 147
Joined: Thu Sep 26, 2013 8:47 am
Location: Chambers Flat 4133 Qld
Contact:

Re: New member from oregon

Postby ian bell » Wed Jul 01, 2015 1:33 am

Hi Josh ,you got it wrong Measure twice cut once .Still like your build
Ian

joshuab
Posts: 408
Joined: Sun Apr 26, 2015 4:10 pm
Location: southern oregon coast
Contact:

Re: New member from oregon

Postby joshuab » Wed Jul 01, 2015 8:06 pm

Quick question for anyone who knows....is it ok to continue posting updates here or should i start a new thread elsewhere. I dont want to do anything on the forum that i shouldn't be, it is just convenient to post here. Thank you for your time, josh
I cut twice and it's still too short :mrgreen:

joshuab
Posts: 408
Joined: Sun Apr 26, 2015 4:10 pm
Location: southern oregon coast
Contact:

Re: New member from oregon

Postby joshuab » Fri Jul 17, 2015 10:03 pm

A little update, will officially weld the winch down after i build and install my cutwater, gd....took your advice and mounted my roller about 1/2" below the bottom planking
Attachments
20150717_214354.jpg
Temporary winch mount and roller under 5 1/2 installed
I cut twice and it's still too short :mrgreen:

joshuab
Posts: 408
Joined: Sun Apr 26, 2015 4:10 pm
Location: southern oregon coast
Contact:

Re: New member from oregon

Postby joshuab » Fri Jul 17, 2015 10:06 pm

Another view showing bunk fit after a little spacer work
Attachments
20150717_214423.jpg
Here's another shot
I cut twice and it's still too short :mrgreen:

joshuab
Posts: 408
Joined: Sun Apr 26, 2015 4:10 pm
Location: southern oregon coast
Contact:

Re: New member from oregon

Postby joshuab » Fri Jul 17, 2015 10:11 pm

Initial sheer fairing, flush right now but will start beveling to match frame contours soon
Attachments
20150704_172641.jpg
Sheer
I cut twice and it's still too short :mrgreen:

joshuab
Posts: 408
Joined: Sun Apr 26, 2015 4:10 pm
Location: southern oregon coast
Contact:

Re: New member from oregon

Postby joshuab » Sun Aug 02, 2015 11:38 am

Here is an update, almost done fairing the sheer beveled to match frame contours, making great progress, in this pic you can see the trailer winch and roller under 5 1/2
Attachments
20150801_103607.jpg
A look at the sheer fairing
Last edited by joshuab on Sun Aug 02, 2015 11:42 am, edited 1 time in total.
I cut twice and it's still too short :mrgreen:

joshuab
Posts: 408
Joined: Sun Apr 26, 2015 4:10 pm
Location: southern oregon coast
Contact:

Re: New member from oregon

Postby joshuab » Sun Aug 02, 2015 11:40 am

Coming along
Attachments
20150801_103518.jpg
Starboard view
I cut twice and it's still too short :mrgreen:

User avatar
hoodman
Posts: 1074
Joined: Thu Nov 10, 2011 8:48 am
Location: Lafayette, IN

Re: New member from oregon

Postby hoodman » Sun Aug 02, 2015 1:07 pm

Looking good!

John1960
Posts: 3
Joined: Sun Aug 02, 2015 4:15 pm

Re: New member from oregon

Postby John1960 » Tue Aug 04, 2015 12:10 pm

Very nice work Josh!

I'm getting more motivated to begin my progect. :)

joshuab
Posts: 408
Joined: Sun Apr 26, 2015 4:10 pm
Location: southern oregon coast
Contact:

Re: New member from oregon

Postby joshuab » Wed Aug 05, 2015 9:18 pm

Didnt have a table saw but i did have an extra freebie skillsaw and a ton of wood scraps, a couple hours of instant engineering and viola......zero dollar tablesaw, works fantastic, i have a spare skillsaw so I'm not out anything but a little time :lol:
Attachments
20150805_210103.jpg
Tablesaw on the fly
I cut twice and it's still too short :mrgreen:

joshuab
Posts: 408
Joined: Sun Apr 26, 2015 4:10 pm
Location: southern oregon coast
Contact:

Re: New member from oregon

Postby joshuab » Wed Aug 05, 2015 9:19 pm

Bottom view
Attachments
20150805_210118.jpg
Underside
I cut twice and it's still too short :mrgreen:

User avatar
gap998
Posts: 371
Joined: Wed May 20, 2015 5:40 pm
Location: Wales, UK

Re: New member from oregon

Postby gap998 » Thu Aug 06, 2015 2:44 am

Great idea Josh,

We did something similar to this with a Router in college; with a bit of thinking you could combine the two to make an interchangeable table saw/profiler.
Gary

Planning a whole fleet, but starting with a Zip...I think.

"Just when you think you've made something idiot-proof, someone builds a better idiot!"

joshuab
Posts: 408
Joined: Sun Apr 26, 2015 4:10 pm
Location: southern oregon coast
Contact:

Re: New member from oregon

Postby joshuab » Sat Aug 08, 2015 9:51 am

hoodman wrote:Looking good!


Thank you sir!
I cut twice and it's still too short :mrgreen:

joshuab
Posts: 408
Joined: Sun Apr 26, 2015 4:10 pm
Location: southern oregon coast
Contact:

Re: New member from oregon

Postby joshuab » Sat Aug 08, 2015 9:56 am

gap998 wrote:Great idea Josh,

We did something similar to this with a Router in college; with a bit of thinking you could combine the two to make an interchangeable table saw/profiler.


Ok here's one last one, made a zero tolerance plate for blade changes, fabbed a built in fence clamping thingy an sanded my hull paint off the table with fresh lines laid out, i realize that this isnt a store bought saw but it cuts beautifully and looks pretty darn good doing it 8)
Attachments
20150808_094828.jpg
Finished poor mans tablesaw
I cut twice and it's still too short :mrgreen:


Return to “New Members, Please Introduce Yourself”

Who is online

Users browsing this forum: No registered users and 5 guests