Page 39 of 48

Re: New member from oregon

Posted: Mon Feb 19, 2018 5:43 am
by DrBryanJ
Verrrry Nice!

Re: New member from oregon

Posted: Mon Feb 19, 2018 7:37 am
by billy c
Looks great!

Re: New member from oregon

Posted: Wed Feb 21, 2018 1:07 pm
by mrintense
Outstanding Josh. Soon. ...tick, ...tick, ...tick!!! :D :D

Re: New member from oregon

Posted: Fri Feb 23, 2018 7:33 pm
by joshuab
Deck goodies, will start locating and test fitting tomorrow.

Re: New member from oregon

Posted: Fri Feb 23, 2018 8:52 pm
by jenko
only 7 months left to get it all done :D

Re: New member from oregon

Posted: Sat Feb 24, 2018 6:00 am
by Hercdrvr
Deck bling!!! Almost time to get your masterpiece wet and go bang it against the dock.
Matt B

Re: New member from oregon

Posted: Sat Feb 24, 2018 7:25 am
by JimmY
Remember to drill oversized holes, you'll want to encapsulate the holes before installing them.

Looking good.

Re: New member from oregon

Posted: Sat Feb 24, 2018 5:53 pm
by joshuab
All deck hardware minus the windshield brackets is test fit, went to do an electrical test and have a dead battery (currently on the charger) pretty happy with the overall look, now to pull all of it off and do the final epoxy coat. 8)

Re: New member from oregon

Posted: Sat Feb 24, 2018 6:31 pm
by vupilot
: :D :D :D

Re: New member from oregon

Posted: Sat Mar 03, 2018 2:14 pm
by joshuab
Pulled all of the deck jewelry off, sanded and applied the last epoxy coat. 8)

Re: New member from oregon

Posted: Sat Mar 03, 2018 9:27 pm
by PeterG
Again, great looking boat with the shiny bits, will look awesome when varnished and hardware back in place.

Re: New member from oregon

Posted: Sat Mar 17, 2018 1:47 pm
by joshuab
After failing to find an auto body shop willing to clear my boat for under 3K i decided to just stick to what i know and i know varnish! The deck was sanded with 220 then scuffed with red scotch bright, masked, tack ragged and the first of many coats of pettit Captains Z-spar 1015 varnish was rolled on and tipped this morning, damn near a glass finish, one down, several more to go. After the deck is complete i will do the sides and transom in the same manner. Making good progress! 8)

Re: New member from oregon

Posted: Sat Mar 17, 2018 4:56 pm
by BarnacleMike
That's the varnish that I used, and I was very happy with it. Your Zip is looking great!

Re: New member from oregon

Posted: Sat Mar 17, 2018 5:13 pm
by hoodman
That looks awesome!

Re: New member from oregon

Posted: Sun Mar 18, 2018 2:49 am
by jenko
great work Josh