Xmas greetings

Here is where we get to welcome all new members.
New members please include your location - Other members close to you may be of great help in locating materials and other needs.

Moderator: Bill Edmundson

Post Reply
ian bell
Posts: 159
Joined: Thu Sep 26, 2013 8:47 am
Location: Chambers Flat 4133 Qld
Contact:

Xmas greetings

Post by ian bell » Thu Dec 17, 2015 3:45 pm

I week out from Xmas. I would like to wish everyone a Happy Xmas and a Safe and prosperous New Year. I'm laid up with a bad back, prolapsed disk and an inguinal hernia
Ian

User avatar
chugalug
Posts: 1268
Joined: Sat Nov 29, 2014 5:01 pm
Location: top of mn.

Re: Xmas greetings

Post by chugalug » Thu Dec 17, 2015 3:54 pm

:D Thanks! Have a merry xmas too.One time,I stepped in a hole in my yard and twisted my back out for one week;then as I was hobbling around the yard -forgot about hole and it put it back in.If I had known that,I would have done it sooner. :D
Working on regular-sized Bo-Jest


"If it's not crooked,It's not mine

Mannanj
Posts: 65
Joined: Fri Sep 28, 2012 5:26 pm
Location: North East Georgia

Re: Xmas greetings

Post by Mannanj » Thu Dec 17, 2015 7:22 pm

My health isn't good, and getting worse.

Merry Christms and Happy New Year to all.
Msgt. Mannan Thomason USAF (Ret)
Bucket List Check Off In Progress
Starting Barrelback

User avatar
mrintense
Posts: 3280
Joined: Thu Jun 10, 2010 11:22 am
Location: Austin, Texas
Contact:

Re: Xmas greetings

Post by mrintense » Fri Dec 18, 2015 3:40 am

Merry Xmas fellows. I can sympathize with the health issues. I think it is part of many of our lives as the years progress. Nonetheless, I for one am thankful that I am around to experience the friendship of so many like minded people. Again Merry Christmas and I hope that all of you feel better.
Carl
a.k.a. Clipper

Crafting a classically styled Vera Cruise

Clipper's Vera Cruise Build

User avatar
Bill Edmundson
Posts: 11568
Joined: Wed Nov 23, 2005 6:45 am
Location: Birmingham, AL, USA
Contact:

Re: Xmas Greetings

Post by Bill Edmundson » Sat Dec 19, 2015 6:05 pm

Have a good Christmas everyone. Take care of yourselves. Seems a lot of us have been having problems. My left hip has been very painful every morning for a couple of hours. Man are the stairs to the basement long and steep the first trip down each day!

Bill
Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build

User avatar
specialk
Posts: 537
Joined: Mon Jan 06, 2014 3:53 pm
Location: Port St. John Florida

Re: Xmas greetings

Post by specialk » Sun Dec 20, 2015 9:58 am

MERRY CHRISTMAS everyone ... my wish for everyone to feel better... and more time to build BOATs....
Kelly...1st Boat...Flats Flyer
2nd Boat.....?

Post Reply

Return to “New Members, Please Introduce Yourself”