newbie crackerbox builder

Here is where we get to welcome all new members.
New members please include your location - Other members close to you may be of great help in locating materials and other needs.

Moderator: Bill Edmundson

speed2go
Posts: 3
Joined: Mon Nov 28, 2016 1:58 pm

newbie crackerbox builder

Postby speed2go » Mon Jan 08, 2018 2:27 pm

Speed2go from Alberta, Canada here.

Will be starting the build of a Cracker Box tomorrow. Would appreciate information on engine and transmission. Do not wish to go with direct drive.

Question: Can someone confirm that a Velvet Drive will fit and work in a 15', un-lengthened Cracker Box?

What engine will fit? Is a 350 Chev too large to work with the Velvet Drive?

Thanks.

Cyclone
Posts: 55
Joined: Sun Jan 08, 2012 7:26 pm
Location: Barrie, Ontario

Re: newbie crackerbox builder

Postby Cyclone » Mon Jan 08, 2018 6:58 pm

Not sure if you checked out the Archives and the Galleries on the Glen L website. There are pictures there of Crackerbox builds with small block V8s and velvet drives. I see the plans say that you can increase the length by 10% by increasing the frame spacing. If you could do this I think it would be good to have the extra length as it would come in handy when working out the layout of the shaft and rudder, more room to work with. I see that many of the pictures show a rudder hung out from the transom with a cavitation plate over the rudder. This also adds to the overall length. It would appear that it can be done and has been done. If you search through the postings here and the information on the website you might find some contacts who have built the crackerbox before that you could ask about their builds. The books from Glen L on Building with Plywood and Inboard Engine Installations are good reference books to have.

User avatar
Bill Edmundson
Posts: 10554
Joined: Wed Nov 23, 2005 6:45 am
Location: Birmingham, AL, USA
Contact:

Re: newbie crackerbox builder

Postby Bill Edmundson » Mon Jan 08, 2018 8:05 pm

Speed

Contact Fergal Butler. He can answer any question and a few you don't want to know. He got caught out in really bad conditions and his boat ended lost on the bottom. He's a great guy though.

Bill
Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build


Return to “New Members, Please Introduce Yourself”

Who is online

Users browsing this forum: No registered users and 6 guests