securing wires

Wiring your boat, How to Wire Lights/Accessories, All things electrical other than actually powering your boat by electric motors.

Moderator: Bill Edmundson

mdweber
Posts: 119
Joined: Fri Feb 14, 2014 5:56 pm

securing wires

Postby mdweber » Sun Aug 17, 2014 8:14 pm

Hello all,
I'm beginning to work out the electrical systems. I've run the wires, but am not sure how to secure them to the frame members that they run along. What do you guys use for this?

User avatar
Bill Edmundson
Posts: 11077
Joined: Wed Nov 23, 2005 6:45 am
Location: Birmingham, AL, USA
Contact:

Re: securing wires

Postby Bill Edmundson » Sun Aug 17, 2014 8:28 pm

I put wires in split loom then cable loops. I also have put a PVC pipe the length of the boat on each side to run wiring through. I try to keep wiring out of the bilge as much as possible to stay away from fumes.

Bill
Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build

mdweber
Posts: 119
Joined: Fri Feb 14, 2014 5:56 pm

Re: securing wires

Postby mdweber » Sun Aug 17, 2014 8:59 pm

Thanks Bill. I like that idea. What are the cable loops?

User avatar
vupilot
Posts: 3352
Joined: Wed Apr 15, 2009 7:36 am
Location: Indy
Contact:

Re: securing wires

Postby vupilot » Sun Aug 17, 2014 9:17 pm

Adel Clamps.

https://www.google.com/search?q=adel+cl ... 00&bih=805

Lowes, HomeDepot, etc carry them in all kinds of sizes both metal/rubber and plastic.

mdweber
Posts: 119
Joined: Fri Feb 14, 2014 5:56 pm

Re: securing wires

Postby mdweber » Mon Aug 18, 2014 8:21 am

Awesome! Now for screwing them into the frames, is it best to drill a larger than needed pilot hole, backfill with thickened epoxy, and then bore a regular pilot hole in that to make it water tight?

User avatar
Bill Edmundson
Posts: 11077
Joined: Wed Nov 23, 2005 6:45 am
Location: Birmingham, AL, USA
Contact:

Re: securing wires

Postby Bill Edmundson » Mon Aug 18, 2014 9:14 am

For me I don't fool with the pre-drill and fill unless it's very exposed area. I usually just use a dab of sealer like 4200 on the screw.

Bill
Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build

mdweber
Posts: 119
Joined: Fri Feb 14, 2014 5:56 pm

Re: securing wires

Postby mdweber » Mon Aug 18, 2014 7:14 pm

those are welcome words, Bill! Got me thinking, would 4200 be good for sealing switches and instruments in the dash?


Return to “Electric Power & Systems”

Who is online

Users browsing this forum: No registered users and 1 guest