Plywood Supplier for Texas Builder

See: "Useful Information and Suppliers" for a list of lumber and plywood suppliers. Also see: "Wood & Plywood Information". Both located in the left-hand column of the Home page.

Moderator: Bill Edmundson

Post Reply
Bill W
Posts: 26
Joined: Thu Oct 06, 2016 3:42 pm
Location: Dallas, Texas

Plywood Supplier for Texas Builder

Post by Bill W » Thu Oct 06, 2016 3:57 pm

Does anyone have a suggested source for plywood near Dallas, Texas ?
Appreciate any help.

Posts: 888
Joined: Mon May 11, 2015 12:52 pm
Location: McKinney TX

Re: Plywood Supplier for Texas Builder

Post by Hercdrvr » Tue Oct 18, 2016 9:56 am

Wood world in Dallas has a good supply of marine plywood and hardwoods suitable for boat construction. They'll order whatever you need if it's not on the shelf, it only takes money.
Matt B
McKinney TX

User avatar
Posts: 6344
Joined: Tue Jul 31, 2007 5:23 pm
Location: East Troy, Wisconsin

Re: Plywood Supplier for Texas Builder

Post by Roberta » Tue Oct 18, 2016 11:06 am

I ordered a lot of 3mm Okoume for the Torpedo. It was way cheaper to buy in bulk and get it shipped. One of my orders was about 34 sheets of ply, mostly the 3mm. It cost about $220.00 to ship from World Panel in NC to Wisconsin (Milwaukee area). I saved anywhere from 10 to 40 bucks a sheet and had residential delivery. Check them out if you are getting a larger order that will absorb the shipping cost.

Roberta :D
Roberta "Queen of the Boat Builders"
Built Zip "Oliver IV", Super Spartan "Jimmy 70", and Torpedo "The Glen L".

Posts: 1
Joined: Tue Oct 24, 2017 3:21 am

Re: Plywood Supplier for Texas Builder

Post by BMcGraw » Tue Oct 24, 2017 3:43 am

Plywood Lumber is well known wholesaler and supplier in Dallas.they have good quality wood and plywood so i will recommend them.

Post Reply

Return to “Wood and Plywood”