Question about ZIP keel

See: "Useful Information and Suppliers" for a list of lumber and plywood suppliers. Also see: "Wood & Plywood Information". Both located in the left-hand column of the Home page.

Moderator: Bill Edmundson

User avatar
Andy Garrett
Posts: 1282
Joined: Tue Aug 31, 2010 11:44 pm
Location: Nampa, Idaho

Re: Question about ZIP keel

Postby Andy Garrett » Mon Feb 06, 2017 6:54 am

I don't think that sounds right.
I seem to remember a bend from frame 4 to 5 1/2 to fasten the keel to the stem via bolts. You say that yours is dead flat... hmm...

I'm at work so I don't have the plans in front of me, but I'm sure that one of my fellow Zippers will chime in to confirm or debunk my suspicions.
Andy Garrett

Perhaps the slowest Zip build in Glen-L history...

User avatar
vupilot
Posts: 3335
Joined: Wed Apr 15, 2009 7:36 am
Location: Indy
Contact:

Re: Question about ZIP keel

Postby vupilot » Mon Feb 06, 2017 7:12 am

Agreed, Andy. There is a slight bend where the keel meets the stem and the bolts help hold the keel against the stem, it isnt quite perfectly flat.

Bill, double check your stem/breasthook height at the very front of the form, it maybe slightly high.

bjfrater
Posts: 125
Joined: Sun May 04, 2014 9:13 pm
Location: Auckland, New Zealand

Re: Question about ZIP keel

Postby bjfrater » Mon Feb 06, 2017 3:03 pm

Yep there is a bend in the keel and you hold it down with the bolts. Heres a picture from my build.

20141004_170104.jpg


Return to “Wood and Plywood”

Who is online

Users browsing this forum: No registered users and 4 guests