Laminating frames

See: "Useful Information and Suppliers" for a list of lumber and plywood suppliers. Also see: "Wood & Plywood Information". Both located in the left-hand column of the Home page.

Moderator: Bill Edmundson

ToddM
Posts: 88
Joined: Mon May 08, 2017 5:51 pm

Re: Laminating frames

Postby ToddM » Sun Aug 20, 2017 8:53 am

DrBryanJ wrote:Todd: The description in the bill of materials say 2". It also says all sizes are nominal unless specified net, so he can use actual size down to 1 and 1/2".


And, it seems that there may be bonding issues with white oak and epoxy? There is a thread about it here on the Glen-l forum:

viewtopic.php?f=5&p=192394#p192394

User avatar
hoodman
Posts: 1794
Joined: Thu Nov 10, 2011 8:48 am
Location: Lafayette, IN

Re: Laminating frames

Postby hoodman » Mon Aug 21, 2017 6:10 pm

All my frames and longitudinals are white oak/epoxy. No problems yet. Just make sure your glue joints are roughed up with 80 grit paper. All test joints have failed in the wood.

rblevens
Posts: 36
Joined: Sun May 13, 2007 4:15 am
Location: Alton, IL

Re: Laminating frames

Postby rblevens » Tue Aug 22, 2017 10:19 am

thanks all


Return to “Wood and Plywood”

Who is online

Users browsing this forum: No registered users and 3 guests