What about a Swap Meet?

User avatar
kens
Posts: 4390
Joined: Wed Nov 12, 2003 5:25 pm
Location: Coastal Georgia

What about a Swap Meet?

Postby kens » Wed Jun 06, 2007 4:51 pm

Anyone interested in a Swap Meet at the Gathering?
I got some extra stuff I would be glad to see go to good use. What about other builders?
Maybe if guys could post what they need, then maybe it could be brought to the Gathering.
Anyone interested??

John K
Posts: 1560
Joined: Thu May 18, 2006 5:19 am
Location: AL

Postby John K » Thu Jun 07, 2007 5:07 am

That sounds like a good idea. I have a few extra things that I need to get rid also. Not much, but would bring them.

User avatar
Bill Edmundson
Posts: 10327
Joined: Wed Nov 23, 2005 6:45 am
Location: Birmingham, AL, USA
Contact:

Postby Bill Edmundson » Thu Jun 07, 2007 5:30 am

Sounds good to me. I've go some Stuff, also. :)
Bill
Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build

gaffrig24
Posts: 170
Joined: Fri May 11, 2007 3:52 pm
Location: Douglasville, GA

Postby gaffrig24 » Wed Jun 13, 2007 8:23 pm

I can probably scrape a few things together. It might lighten up my boat as well

Keith

User avatar
BruceDow
Posts: 2132
Joined: Sat Jun 17, 2006 2:21 pm
Location: Toronto, ON, Canada
Contact:

Postby BruceDow » Thu Jun 14, 2007 3:39 am

Count me in.
Bruce.

~~ Do what you love, and love what you do. ~~
~~ To me - only my boat is not yet perfect. Everybody else's is to be admired for I know the path they have walked (Dave Lott, 2010) ~~
Dow's Monaco Project

User avatar
leakcheck
Posts: 2950
Joined: Mon Nov 17, 2003 3:01 pm
Location: Lander Wyoming

Postby leakcheck » Sat Jun 16, 2007 11:21 am

Swap meet sounds GREAT to me too...

Steve

PS..Bill, you are still bringing the Lola's right ?

User avatar
Bill Edmundson
Posts: 10327
Joined: Wed Nov 23, 2005 6:45 am
Location: Birmingham, AL, USA
Contact:

Postby Bill Edmundson » Sat Jun 16, 2007 12:18 pm

Lola's?

Well, one for sure!

I can't predict the one I have! :lol: Much less 5 or 6 others. :shock:

So far, I have the following:

1/4" npt fuel barbs
1/4" anti-siphon valve
exhaust trumpet w/flap
1 1/2" fuel fill line
1/4" fuel line
5/16" fuel line

Bill
Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build

User avatar
leakcheck
Posts: 2950
Joined: Mon Nov 17, 2003 3:01 pm
Location: Lander Wyoming

Postby leakcheck » Sat Jun 16, 2007 7:01 pm

Well then, I will definitely swap you for the one you are bringing !!1

Steve

PS...how deep is that water anyway??

User avatar
kens
Posts: 4390
Joined: Wed Nov 12, 2003 5:25 pm
Location: Coastal Georgia

Postby kens » Mon Sep 10, 2007 9:46 am

I am cleaning out my plywood bits & pieces. I got several pieces of 6mm Meranti BS1088 too small for me to work with. However, I think someone cold molding a hull could use them, they are 8' long various widths.
If somebody wants it, I'll swap out for a few cold ones at the Swap Meet.

LTGoshen
Posts: 19
Joined: Thu Aug 09, 2007 6:10 pm
Location: Atlanta Georgia

Anyone interested in a Swap Meet at the Gathering?

Postby LTGoshen » Mon Oct 01, 2007 7:04 pm

Hey Guys dont think I can make it to the gathering, Hower, I met a guy last week that has a chevy 350 motor set up for a boat. he has 2 sets of boat manafolds 2 transmissions and 1 motor that is set up to run in the counter rotation. He has the 2 shafts the 2 props on the couplings. Its from an old Christ craft they let rott out. I dont think I need this stuff but sombody surly would like to have it. I will be buildiong a nother boat after the squirt but the next project will be an out board aws well.
I need a motor for my squirt. he wants 1,000.00 for this stuff.

Should I buy it in the hopes to trad it out for a out board motor for the squirt??
Live right now. Live every day in the sun.

upspirate

Postby upspirate » Tue Oct 02, 2007 6:16 am

I would just put aside the money,what if you found a motor & the people didn't want to trade? Then you'd have to dump the inboard stuff

User avatar
Bill Edmundson
Posts: 10327
Joined: Wed Nov 23, 2005 6:45 am
Location: Birmingham, AL, USA
Contact:

Postby Bill Edmundson » Fri Oct 05, 2007 6:29 pm

I just ordered a Heavy Duty Crimping Tool (#6 - 4/0).

If you need to do battery cables bring you cables and lugs.

Bill
Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build

User avatar
kens
Posts: 4390
Joined: Wed Nov 12, 2003 5:25 pm
Location: Coastal Georgia

Postby kens » Tue Oct 16, 2007 5:37 pm

We're getting down to the wire here........what kind of parts are folks wanting, so that those that have surplus can bring them.

I got a couple bushels of stuff, but I hate to drag it around in my truck if nobody has a want for it.

User avatar
narduccimarine
Posts: 205
Joined: Sat Oct 14, 2006 5:50 pm
Location: Decatur Alabama
Contact:

Postby narduccimarine » Tue Oct 16, 2007 6:26 pm

Who knows, we all need goodies. I have a 10 degree strut with water pickup built in, I think from a Jersey Speed Skiff, and a turn fin. Probably have some other stuff to bring too.
Nothing like a Horse traders paradise

Bob
I just don't understand, I cut that plank twice and its still too short
http://www.narduccimarine.freehosting.net

User avatar
narduccimarine
Posts: 205
Joined: Sat Oct 14, 2006 5:50 pm
Location: Decatur Alabama
Contact:

Postby narduccimarine » Tue Oct 16, 2007 6:26 pm

Who knows, we all need goodies. I have a 10 degree strut with water pickup built in, I think from a Jersey Speed Skiff, and a turn fin. Probably have some other stuff to bring too.
Nothing like a Horse traders paradise

Bob
I just don't understand, I cut that plank twice and its still too short

http://www.narduccimarine.freehosting.net


Return to “Gathering 2007”

Who is online

Users browsing this forum: No registered users and 1 guest