Fiberglassing over plywood and one-off fiberglass methods. See: "Boatbuilding Methods", in the left-hand column of the Home page.
- Posts: 42
- Joined: Tue Sep 13, 2016 11:34 am
- Location: Monroe, Ga
Getting close to fiberglassing my Malahini. I was planning to lap at the keel and let it hang to the sheer. I know no sharp edges. I have about 1/4" radius. Thanks
- Posts: 1950
- Joined: Thu Nov 10, 2011 8:48 am
- Location: Lafayette, IN
That sounds good if your cloth is wide enough to go all the way to the sheer. I ended up lapping at the keel and the chines.