Where to lap the cloth

Fiberglassing over plywood and one-off fiberglass methods. See: "Boatbuilding Methods", in the left-hand column of the Home page.

Moderator: ttownshaw

Post Reply
Thompson
Posts: 42
Joined: Tue Sep 13, 2016 11:34 am
Location: Monroe, Ga

Where to lap the cloth

Post by Thompson » Thu May 04, 2017 10:15 am

Getting close to fiberglassing my Malahini. I was planning to lap at the keel and let it hang to the sheer. I know no sharp edges. I have about 1/4" radius. Thanks
Top
User avatar
hoodman
Posts: 1974
Joined: Thu Nov 10, 2011 8:48 am
Location: Lafayette, IN

Re: Where to lap the cloth

Post by hoodman » Thu May 04, 2017 5:03 pm

That sounds good if your cloth is wide enough to go all the way to the sheer. I ended up lapping at the keel and the chines.
Matt

Building a Geronimo......!
viewtopic.php?f=2&t=25139
Top
Post Reply

Return to “Fiberglass”