Wizard WA-25 1956 Magneto removal

About inboard or outboard motors.

Moderator: Bill Edmundson

Post Reply
Floater
Posts: 1
Joined: Mon Jun 10, 2019 9:24 am

Wizard WA-25 1956 Magneto removal

Post by Floater » Mon Jun 10, 2019 9:39 am

Hello. Newbe. This is my first Mercury rebuild. (except KG-7s). The removal of the magneto is tricky. It's completely loose but not removable due to the linkage at the lower side which seems to be held by an unreachable 7/16 bolt.

Is there a trick I'm missing?

Thanks

JimmY
Posts: 734
Joined: Sat Jul 30, 2016 11:08 am
Location: Brighton, MI

Re: Wizard WA-25 1956 Magneto removal

Post by JimmY » Mon Jun 10, 2019 5:56 pm

Try checking on the AOMCI website, there should be someone there who can help.
-Jim
Nothing says poor craftsmanship like wrinkles in your duct tape!

Post Reply

Return to “Boat Power”