Converting an I/O motor to Inboard

About inboard or outboard motors.

Moderator: Bill Edmundson

Post Reply
DuckHunterJon
Posts: 18
Joined: Mon Mar 03, 2008 11:32 am
Location: Marion, NY

Converting an I/O motor to Inboard

Post by DuckHunterJon » Thu Aug 09, 2018 6:53 am

Hi all, starting to think about a new build, specifically about the power plant. I'm looking to build an inboard (leaning toward a Monaco, but not positive), and in looking around, I see many used I/O motors for sale. I actually have a chance at a 4.3L Mercruiser/Alpha 1 combo with very low hours for a very decent price. If I remove the outdrive, what besides a transmission would be required to convert it to inboard use? Just trying to guage whether the savings up front would be worth it over buying something specific. Thanks!
Jonathan Hunter
Marion, NY

Duck Boat Two complete, looking for a new project!

User avatar
jamundsen
Posts: 1518
Joined: Tue May 26, 2009 12:47 pm
Location: Lakeland, Fl
Contact:

Re: Converting an I/O motor to Inboard

Post by jamundsen » Sat Oct 06, 2018 12:17 pm

You will need a starter, a bell housing, a flywheel and a flex plate to attach it to a transmission
Everything else should be usable.
John Amundsen
Monte Carlo
Lakeland,Fl

Work tends to get in the way of boat building

User avatar
kens
Posts: 4579
Joined: Wed Nov 12, 2003 5:25 pm
Location: Coastal Georgia

Re: Converting an I/O motor to Inboard

Post by kens » Sat Oct 06, 2018 1:06 pm

you can read my post in the archive newsletter #56.
I converted a 3.0L to a velvet drive, it uses most all the same chevy parts.
you can do the same with the V6.
your V6 will be easier than my 4cyl project, you can get all the motor mounts for that

http://www.glen-l.com/weblettr/weblette ... oubleeagle
Oak is over rated, everything about it takes extra time; then it warps, splits or checks !!! :roll:

Post Reply

Return to “Boat Power”