Volvo Penta IPS System

About inboard or outboard motors.

Moderator: Bill Edmundson

Post Reply
User avatar
Posts: 98
Joined: Sat Nov 29, 2008 10:03 pm
Location: Petawawa, Ontario, Canada

Volvo Penta IPS System

Post by mobil300 »

Has Anybody Considered Using A Penta IPS System In A Glen-L Boat? ... ta_ips.htm

It Seems Like Any Interesting Setup All Be It Probably Very Expensive.


Posts: 299
Joined: Wed Oct 17, 2007 3:59 pm
Location: Knoxville Tennessee


Post by rasorinc »

I bet that their price is out of this world. I can buy a dressed, ready to drop in 5.7 GM 300hp for $5,000 U.S. a JET FOR $4,500 OR A TRANNY AND PROP, DRIVESHAFT AND RUDDER FOR ABOUT THE SAME I bet that setup is $25,000 per. Let me know if you find out please.
Wood lasts generations.

User avatar
Posts: 4946
Joined: Wed Nov 12, 2003 5:25 pm
Location: Coastal Georgia

Post by kens »

Besides the expected cost of it, you have to double that because you cannot install them as single engine; they have to be a minimum of twins.
So, double the cost just to start.

Posts: 281
Joined: Thu Apr 27, 2006 11:06 am
Location: Kitchener, Ontario, CANADA!!!

Re: Volvo Penta IPS System

Post by Drew »

More like $40,000 per drive

Post Reply

Return to “Boat Power”