Glen-L.com

The Boatbuilder Connection
It is currently Thu May 23, 2013 2:30 am

View unanswered posts | View active topics


Board index » Odds and Ends » Boat Power

All times are UTC - 8 hours [ DST ]



Post new topic Reply to topic  Page 1 of 3
  [ 32 posts ]  Go to page 1, 2, 3  Next
  Print view Previous topic | Next topic 
Author Message
pamelalynne1
PostPosted: Fri May 04, 2012 3:34 pm 
Offline

Joined: Thu Jul 29, 2010 3:55 pm
Posts: 356
I have all these spare parts around. I think I'll build something. :lol: :lol: :lol:
Attachment:
Every time I look there are more pieces.jpg
Every time I look there are more pieces.jpg [ 2.24 MiB | Viewed 1249 times ]
Attachment:
Does anyone know haw this thing goes together.jpg
Does anyone know haw this thing goes together.jpg [ 2.52 MiB | Viewed 1249 times ]
Attachment:
Every time I look there are more pieces.jpg
Every time I look there are more pieces.jpg [ 2.24 MiB | Viewed 1249 times ]


Attachments:
Strung up stripped down and cleaned.jpg
Strung up stripped down and cleaned.jpg [ 2.66 MiB | Viewed 1249 times ]
Top
 Profile  
 
pamelalynne1
PostPosted: Fri May 04, 2012 3:42 pm 
Offline

Joined: Thu Jul 29, 2010 3:55 pm
Posts: 356
I missed a couple :lol: :lol: :lol:
Attachment:
buff it up.jpg
buff it up.jpg [ 2.52 MiB | Viewed 1248 times ]
Attachment:
Heavy duty short shaft and standard long shaft.jpg
Heavy duty short shaft and standard long shaft.jpg [ 2.16 MiB | Viewed 1248 times ]

I also found out how to turn a 65 into an 85
Attachment:
Donor 85 HP whence came the carburetor and the hood.jpg
Donor 85 HP whence came the carburetor and the hood.jpg [ 2.58 MiB | Viewed 1248 times ]

Building the motor is almost as much fun as building the boat.
Top
 Profile  
 
pamelalynne1
PostPosted: Sun May 06, 2012 9:19 am 
Offline

Joined: Thu Jul 29, 2010 3:55 pm
Posts: 356
Fedex delivered the Evinrude paint yesterday. So I've been sanding, cleaning and painting all morning. I thought the color was going to be darker; but it turns out it matches the original.
This is the only way to paint a motor. :D
Attachment:
transom bracket.jpg
transom bracket.jpg [ 2.26 MiB | Viewed 1196 times ]
Attachment:
front bottom plate.jpg
front bottom plate.jpg [ 2.49 MiB | Viewed 1196 times ]
Attachment:
heavy duty lower unit.jpg
heavy duty lower unit.jpg [ 2.16 MiB | Viewed 1196 times ]
Attachment:
heavy duty lower unit.jpg
heavy duty lower unit.jpg [ 2.16 MiB | Viewed 1196 times ]


Top
 Profile  
 
fergal butler
PostPosted: Sun May 06, 2012 9:26 am 
Offline
User avatar

Joined: Sun Sep 06, 2009 2:55 am
Posts: 999
Location: Co.Dublin, Ireland.
Tell me about it :lol:
Image

Image

Image

Image

Image

Image

_________________
Malahini, SEAN-NÓS http://www.youtube.com/watch?v=Qd6vkPjEy4U
http://www.youtube.com/watch?v=8uDVzcVpdhc
crackerbox build http://s753.photobucket.com/albums/xx17 ... =slideshow
Top
 Profile  
 
pamelalynne1
PostPosted: Sun May 06, 2012 9:32 am 
Offline

Joined: Thu Jul 29, 2010 3:55 pm
Posts: 356
The only let me put three pics on at a time :(
Attachment:
rear bottom plate and mid section covers.jpg
rear bottom plate and mid section covers.jpg [ 2.69 MiB | Viewed 1193 times ]
Attachment:
airt flow parts.jpg
airt flow parts.jpg [ 3.05 MiB | Viewed 1193 times ]


The two wires I replaced on the timing base were going to cost me $30 each.
Attachment:
timing base.jpg
timing base.jpg [ 2.09 MiB | Viewed 1193 times ]


Fergal, I left the block and heads the original color. The dang power head is too heavy to carry around. I'm an old lady. :lol: :lol:
Top
 Profile  
 
fergal butler
PostPosted: Sun May 06, 2012 9:37 am 
Offline
User avatar

Joined: Sun Sep 06, 2009 2:55 am
Posts: 999
Location: Co.Dublin, Ireland.
Just as well the head was a pain in the ass to paint :D

_________________
Malahini, SEAN-NÓS http://www.youtube.com/watch?v=Qd6vkPjEy4U
http://www.youtube.com/watch?v=8uDVzcVpdhc
crackerbox build http://s753.photobucket.com/albums/xx17 ... =slideshow
Top
 Profile  
 
pamelalynne1
PostPosted: Sun May 06, 2012 1:17 pm 
Offline

Joined: Thu Jul 29, 2010 3:55 pm
Posts: 356
That's because you painted it upside down. :lol: :lol:
Yours looks like a fastwin 15 or 18. The rubber lower mounts make it at least a 55 or later. The three drilled holes in the side of the hood for the emblem might indicate 57 or 58 18 HP. But then, I'm just guessing. :D
Top
 Profile  
 
fergal butler
PostPosted: Sun May 06, 2012 1:45 pm 
Offline
User avatar

Joined: Sun Sep 06, 2009 2:55 am
Posts: 999
Location: Co.Dublin, Ireland.
pamelalynne1 wrote:
That's because you painted it upside down. :lol: :lol:
Yours looks like a fastwin 15 or 18. The rubber lower mounts make it at least a 55 or later. The three drilled holes in the side of the hood for the emblem might indicate 57 or 58 18 HP. But then, I'm just guessing. :D



Spot on 1958 18hp fastwin. :D

_________________
Malahini, SEAN-NÓS http://www.youtube.com/watch?v=Qd6vkPjEy4U
http://www.youtube.com/watch?v=8uDVzcVpdhc
crackerbox build http://s753.photobucket.com/albums/xx17 ... =slideshow
Top
 Profile  
 
pamelalynne1
PostPosted: Sun May 06, 2012 1:49 pm 
Offline

Joined: Thu Jul 29, 2010 3:55 pm
Posts: 356
I do know my vintage Evinrudes. I had a 1955 Big Twin 25 on a 12 foor Whirlwind when I was in high school. "Aquasonic" Manual start, grunt. I had to straddle the rear seat and use both hands to pull the starter.
Top
 Profile  
 
fergal butler
PostPosted: Sun May 06, 2012 1:55 pm 
Offline
User avatar

Joined: Sun Sep 06, 2009 2:55 am
Posts: 999
Location: Co.Dublin, Ireland.
pamelalynne1 wrote:
I do know my vintage Evinrudes. I had a 1955 Big Twin 25 on a 12 foor Whirlwind when I was in high school. "Aquasonic" Manual start, grunt. I had to straddle the rear seat and use both hands to pull the starter.


I'm more of a merc man and am only doing up the evinrude to pay for more merc's :lol: :lol: :lol:

_________________
Malahini, SEAN-NÓS http://www.youtube.com/watch?v=Qd6vkPjEy4U
http://www.youtube.com/watch?v=8uDVzcVpdhc
crackerbox build http://s753.photobucket.com/albums/xx17 ... =slideshow
Top
 Profile  
 
upspirate
PostPosted: Mon May 07, 2012 5:09 am 
Offline
User avatar

Joined: Fri Dec 08, 2006 5:21 pm
Posts: 8006
Location: tarpon springs fl
fergal butler wrote:
pamelalynne1 wrote:
I do know my vintage Evinrudes. I had a 1955 Big Twin 25 on a 12 foor Whirlwind when I was in high school. "Aquasonic" Manual start, grunt. I had to straddle the rear seat and use both hands to pull the starter.


I'm more of a merc man and am only doing up the evinrude to pay for more merc's :lol: :lol: :lol:
:mrgreen: :mrgreen: :mrgreen:

_________________
Boat building can best be defined as an endless series of
tragedies obscured by the occasional miracle, followed by a good bottle of beer.

Don't Dream Your Life, Live Your Dream
Top
 Profile  
 
pamelalynne1
PostPosted: Tue May 08, 2012 5:10 am 
Offline

Joined: Thu Jul 29, 2010 3:55 pm
Posts: 356
Everything I can make on my current projects is going toward the down payment on a local boat repair shop. The owner is retiring. The Chris Craft Continental bottom refinish job hasn't come yet. Hoping to have that here this coming weekend.
Top
 Profile  
 
pamelalynne1
PostPosted: Wed May 09, 2012 2:09 pm 
Offline

Joined: Thu Jul 29, 2010 3:55 pm
Posts: 356
Things are going back together. But I think I have more spare parts now then when I started. :lol: :lol: :lol: :lol:
Attachment:
Starting to put things together.jpg
Starting to put things together.jpg [ 2.55 MiB | Viewed 1099 times ]
Attachment:
2 coats of paint so far.jpg
2 coats of paint so far.jpg [ 2.6 MiB | Viewed 1099 times ]
Attachment:
100_0538.jpg
100_0538.jpg [ 2.46 MiB | Viewed 1099 times ]


Top
 Profile  
 
John B
PostPosted: Wed May 09, 2012 3:57 pm 
Offline
User avatar

Joined: Mon Feb 11, 2008 11:07 am
Posts: 441
Location: Bellflower, CA
Looking guuuudddd! Nice work!

_________________
Democracy is 2 wolves and a lamb voting as to what to have for lunch.
Liberty is a well-armed lamb contesting the result of the vote.
Top
 Profile  
 
Roberta Hegy
PostPosted: Thu May 10, 2012 4:59 am 
Offline
User avatar

Joined: Tue Jul 31, 2007 5:23 pm
Posts: 2874
Location: East Troy, Wisconsin
Gonna look Brand New!!! Nice job!!!

Roberta :D :D :D :D :D :D

_________________
Roberta
Built Zip "Oliver IV" and Super Spartan "Jimmy 70"
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 3
  [ 32 posts ]  Go to page 1, 2, 3  Next

Board index » Odds and Ends » Boat Power

All times are UTC - 8 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 0 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group