Seattle Barrelback progress

A forum for contacting other builders of Ken Hankinson designs. These designs are now a part of the Glen-L family.

Moderators: Bill Edmundson, billy c

RobertCugini
Posts: 139
Joined: Sat Dec 19, 2009 1:46 pm
Location: Renton, WA
Contact:

Seattle Barrelback progress

Postby RobertCugini » Fri Aug 03, 2012 5:42 pm

Final layup before Mahogany!

Image

User avatar
Bob Perkins
Posts: 445
Joined: Tue Mar 29, 2005 6:28 am
Location: North of Boston (MA)
Contact:

Re: Seattle Barrelback progress

Postby Bob Perkins » Fri Aug 03, 2012 8:15 pm

Looks good !
Keep up the fine work.
Regards,
Bob Perkins

All the Fun Stuff
https://bperkins.wordpress.com/

User avatar
Gayle Brantuk
Posts: 1562
Joined: Tue Nov 11, 2003 1:02 pm
Location: Bellflower, CA
Contact:

Re: Seattle Barrelback progress

Postby Gayle Brantuk » Wed Aug 08, 2012 10:26 am

Awesome Robert!

falconer100
Posts: 68
Joined: Wed Nov 16, 2011 5:33 pm
Location: solihull UK

Re: Seattle Barrelback progress

Postby falconer100 » Tue Aug 21, 2012 3:32 pm

Very nice work.

That will look superb with the mahogany

Regards Martin.

Trackhappy
Posts: 1411
Joined: Wed Feb 17, 2010 5:42 pm
Location: Sunshine Coast, Queensland, Australia. Building Gentry.

Re: Seattle Barrelback progress

Postby Trackhappy » Tue Aug 21, 2012 4:21 pm

That's a fun stage to be at. Looking great :D . I will be very interested to see how you decide to lay out the top layer. I didn't like the sweep up at the front so opted to go with planks following the waterline, but it means more waste and end to end joins as the angle changes.
By the time I have built a boat, I'll be ready to build a boat....

RobertCugini
Posts: 139
Joined: Sat Dec 19, 2009 1:46 pm
Location: Renton, WA
Contact:

Re: Seattle Barrelback progress

Postby RobertCugini » Wed Dec 19, 2012 3:43 pm

Started the Mahogany Layer. I thought I'd start on the keel where I can cover my mistakes with paint.

Got the resin pigmented,(It looks like chocolate frosting) and the jig that Bob Perkins suggested all ready to go.
Attachments
IMG_0003.JPG
IMG_0011.JPG
IMG_0008.JPG

RobertCugini
Posts: 139
Joined: Sat Dec 19, 2009 1:46 pm
Location: Renton, WA
Contact:

Re: Seattle Barrelback progress

Postby RobertCugini » Tue Jan 01, 2013 5:14 pm

Finished the transom and one side of the bottom.
One more side and I'm done with the bottom!

Robert
Attachments
IMG_0014.JPG

User avatar
Bob Perkins
Posts: 445
Joined: Tue Mar 29, 2005 6:28 am
Location: North of Boston (MA)
Contact:

Re: Seattle Barrelback progress

Postby Bob Perkins » Wed Jan 02, 2013 6:40 am

Looking Good!
I like the color ;)
Regards,
Bob Perkins

All the Fun Stuff
https://bperkins.wordpress.com/

RobertCugini
Posts: 139
Joined: Sat Dec 19, 2009 1:46 pm
Location: Renton, WA
Contact:

Re: Seattle Barrelback progress

Postby RobertCugini » Sun Jan 13, 2013 5:45 pm

A major milestone today, (At least if feels like it.)
I finished the bottom and transom mahogany layups.
Still have to trim, sand everything, but I'm excited.
Turned out well thanks to all the input. (Thanks Bob!)
Attachments
IMG_0038.JPG

User avatar
darthplywood
Posts: 591
Joined: Tue Dec 29, 2009 12:53 pm
Location: Erie, PA

Re: Seattle Barrelback progress

Postby darthplywood » Sun Jan 13, 2013 6:02 pm

WOW! She looks great!
Built the 17' Glen-L "Sea Knight"
yet to come...11' Glen-L "Utility"

User avatar
Bob Perkins
Posts: 445
Joined: Tue Mar 29, 2005 6:28 am
Location: North of Boston (MA)
Contact:

Re: Seattle Barrelback progress

Postby Bob Perkins » Mon Jan 14, 2013 7:15 am

Looking good!!
Regards,
Bob Perkins

All the Fun Stuff
https://bperkins.wordpress.com/

RobertCugini
Posts: 139
Joined: Sat Dec 19, 2009 1:46 pm
Location: Renton, WA
Contact:

Re: Seattle Barrelback progress

Postby RobertCugini » Sat Jan 26, 2013 1:54 pm

Thanks to Bob Perkins and also Jim Ritter from Sag Harbor for helping me understand the process of lining off the hull.
All went without a hitch.
I used a 18 Gauge nailer and a spiling batten to line off the hull after doing some basic math.
How do you think it looks?
Attachments
IMG_0157.JPG
IMG_0159.JPG

User avatar
Bob Perkins
Posts: 445
Joined: Tue Mar 29, 2005 6:28 am
Location: North of Boston (MA)
Contact:

Re: Seattle Barrelback progress

Postby Bob Perkins » Sat Jan 26, 2013 2:12 pm

it looks good - but naked.. needs a coat of wood :)
Regards,
Bob Perkins

All the Fun Stuff
https://bperkins.wordpress.com/

RobertCugini
Posts: 139
Joined: Sat Dec 19, 2009 1:46 pm
Location: Renton, WA
Contact:

Re: Seattle Barrelback progress

Postby RobertCugini » Tue Feb 19, 2013 9:10 pm

Bob:

I tried you trimming jig and method today, I must say it makes slick work of it.
I hand fit a number of boards and the trimmer jig works FAR better and much faster,
not to mention elmination of the operator error malfunctions when hand planning a piece to shape.

Thanks again for a bit of good advice and the photos. This is going to work great!

Did the first layup on the sides and am progressing. More photos soon.

Robert

User avatar
Bill Edmundson
Posts: 10431
Joined: Wed Nov 23, 2005 6:45 am
Location: Birmingham, AL, USA
Contact:

Re: Seattle Barrelback progress

Postby Bill Edmundson » Tue Feb 19, 2013 9:47 pm

:D It makes me happy when we can pass on what we have learned. We got a lot of it from those who came before. Pay it back by passing it along.

Bill
Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build


Return to “Hankinson designs”

Who is online

Users browsing this forum: Bill Edmundson and 4 guests