Epifanes over Epoxy

Painting options, interior and exterior.

Moderators: ttownshaw, billy c

Post Reply
User avatar
Roberta
Posts: 6584
Joined: Tue Jul 31, 2007 5:23 pm
Location: East Troy, Wisconsin

Epifanes over Epoxy

Post by Roberta »

When using Epifanes over Epoxy resins, make sure you wait two weeks or more for the epoxy to fully cure before coating with the Epifanes. I only waited about three days and the Epifanes would not dry. I sanded the epoxy before coating and "assumed" the epoxy had cured enough. WRONG!!!! I wound up removing the sticky mess with lacquer thinner. Fortunately the pieces I coated were only small sole boards for the Super Spartan. Epifanes does warn of this possibility in their website. Coating over epoxy and fiber glass is fine as long as you wait for a full cure. Test a small area if unsure or use a test piece epoxied the same time as your project.

http://www.epifanes.com/advice.html


Roberta :oops:
Roberta "Queen of the Boat Builders"
Built Zip "Oliver IV", Super Spartan "Jimmy 70", and Torpedo "The Glen L".

User avatar
thudpucker
Posts: 1291
Joined: Sun Dec 07, 2008 3:31 pm
Location: Cullman AL

Re: Epifanes over Epoxy

Post by thudpucker »

Roberta only a Super-Tech would use a big word like "Epifanes" on simple-tech's like me.

I'm still wondering about PE instead of Epoxy.

User avatar
Roberta
Posts: 6584
Joined: Tue Jul 31, 2007 5:23 pm
Location: East Troy, Wisconsin

Re: Epifanes over Epoxy

Post by Roberta »

That's not a big word, Thud! It's a brand name.LOL

Roberta :lol: :lol: :lol:
Roberta "Queen of the Boat Builders"
Built Zip "Oliver IV", Super Spartan "Jimmy 70", and Torpedo "The Glen L".

Post Reply

Return to “Painting”