Biscayne 22
Moderators: Bill Edmundson, billy c
-
- Posts: 72
- Joined: Sun May 09, 2010 12:21 pm
Biscayne 22
Sorry, I have not sent more updates just been busy.
Anyhow here are a couple of pics.
Very excited to get to finishing the decks!
BTW: 4 years into it and I figure roughly 1000 hour of labor!
Keith Miller
Anyhow here are a couple of pics.
Very excited to get to finishing the decks!
BTW: 4 years into it and I figure roughly 1000 hour of labor!
Keith Miller
-
- Posts: 1412
- Joined: Wed Feb 17, 2010 5:42 pm
- Location: Sunshine Coast, Queensland, Australia. Building Gentry.
Re: Biscayne 22
That's some pretty impressive work going on there. Well done!!!
By the time I have built a boat, I'll be ready to build a boat....
- Gayle Brantuk
- Posts: 1872
- Joined: Tue Nov 11, 2003 1:02 pm
- Location: San Clemente, CA
- Contact:
Re: Biscayne 22
Very nice Keith! Thanks for the photos. Looks beautiful even unfinished!
-
- Posts: 72
- Joined: Sun May 09, 2010 12:21 pm
- Bill Edmundson
- Posts: 12036
- Joined: Wed Nov 23, 2005 6:45 am
- Location: Birmingham, AL, USA
- Contact:
Re: Biscayne 22
Keith
I can't wait to see that thing in glossy
Bill
I can't wait to see that thing in glossy

Bill
Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build
Tahoe 19 Build
- Bob Perkins
- Posts: 476
- Joined: Tue Mar 29, 2005 6:28 am
- Location: North of Boston (MA)
- Contact:
Re: Biscayne 22
Looking good - keep up the good work !
-
- Posts: 204
- Joined: Sun Jan 02, 2011 1:47 pm
Re: Biscayne 22
Just excellent! Loving the mysterious engine hatch. Is it there, or will you cut it in later?
Grampa Steve
Grampa Steve
Re: Biscayne 22



- Bob Gerdisch
- Posts: 5
- Joined: Mon Feb 02, 2009 6:37 pm
Re: Biscayne 22
Looks great! Can you tell me about the deck. That is what I have in mind for my project.
Bob G.
Bob G.
-
- Posts: 72
- Joined: Sun May 09, 2010 12:21 pm
Re: Biscayne 22
Bill, I can't wait till its in glossy either!
Bob P, Thanks, I'll keep working.
Grampa Steve, The engine hatch is located but I'll cut it in later (scary), there are also two hatches that will be near the stern for easy access to the rudder.
Vupilot, Thanks!
Bob G, the deck is hull and deck is genuine mahogany the coaming boards and king board are stained eboney, the rest or the deck and hull are stained 2 parts Chris Craft red and on part mahogany brown (interlux). What else can I tell you?
I'll try to keep the pictures coming. I'm so excited I can see the end in sight after four years.
Thanks,
Keith Miller
Bob P, Thanks, I'll keep working.
Grampa Steve, The engine hatch is located but I'll cut it in later (scary), there are also two hatches that will be near the stern for easy access to the rudder.
Vupilot, Thanks!
Bob G, the deck is hull and deck is genuine mahogany the coaming boards and king board are stained eboney, the rest or the deck and hull are stained 2 parts Chris Craft red and on part mahogany brown (interlux). What else can I tell you?
I'll try to keep the pictures coming. I'm so excited I can see the end in sight after four years.
Thanks,
Keith Miller
Re: Biscayne 22
Wow Keith,
Really looking great. The stains compliment each other quite nicely. I can imagine how you must feel. I think about this day constantly and can't wait until I get to that point in my own build. Keep up the good work and thanks for sharing the pictures.
Really looking great. The stains compliment each other quite nicely. I can imagine how you must feel. I think about this day constantly and can't wait until I get to that point in my own build. Keep up the good work and thanks for sharing the pictures.
- vettepilot
- Posts: 270
- Joined: Wed Jan 26, 2011 12:40 am
- Location: Childers SE Queensland
Re: Biscayne 22
I agree with Bill...thats going to be beautiful all nice and glossy.. 

The Bitterness of Poor Quality, Remains Long After The Sweetness of Cut Price is Forgotten...Thanks Dad R.I.P.
-
- Posts: 72
- Joined: Sun May 09, 2010 12:21 pm
Re: Biscayne 22
OK here is some gloss, not done yet but getting there.
Can't wait to get some calk & trim on her.
Keith Miller
Can't wait to get some calk & trim on her.
Keith Miller
- Bill Edmundson
- Posts: 12036
- Joined: Wed Nov 23, 2005 6:45 am
- Location: Birmingham, AL, USA
- Contact:
Re: Biscayne 22
Keith!
Man that is looking great
Bill
Man that is looking great

Bill

Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build
Tahoe 19 Build
Re: Biscayne 22
Absolutely beautiful!!