Aussie Gentry

Designs for inboard or outboard power

Moderator: BruceDow

John R
Posts: 115
Joined: Wed Feb 11, 2015 3:04 pm

Re: Aussie Gentry

Postby John R » Thu Apr 27, 2017 11:30 pm

G/Day well got the Silver Ash stem strip on then i had a gold stripe on between the blue and the clear this was a disaster good quality paint but stuffed so off it came, so i will rethink what i will put there, ok good weather here so first coat of varnish went on today many more to go.....John
IMG_7092.jpg

IMG_7091.jpg

IMG_7094.jpg

John R
Posts: 115
Joined: Wed Feb 11, 2015 3:04 pm

Re: Aussie Gentry

Postby John R » Thu Apr 27, 2017 11:32 pm

IMG_7096.jpg

IMG_7093.jpg

IMG_7095.jpg

John R
Posts: 115
Joined: Wed Feb 11, 2015 3:04 pm

Re: Aussie Gentry

Postby John R » Thu Apr 27, 2017 11:37 pm

IMG_7099.jpg

IMG_7097.jpg

IMG_7098.jpg

User avatar
Roberta
Posts: 5885
Joined: Tue Jul 31, 2007 5:23 pm
Location: East Troy, Wisconsin

Re: Aussie Gentry

Postby Roberta » Fri Apr 28, 2017 5:48 am

Beautiful!!!!

Roberta :D :D :D :D :D :D :D :D :D :D
Roberta "Queen of the Boat Builders"
Built Zip "Oliver IV", Super Spartan "Jimmy 70", and Torpedo "The Glen L".

JimmY
Posts: 483
Joined: Sat Jul 30, 2016 11:08 am
Location: Brighton, MI

Re: Aussie Gentry

Postby JimmY » Fri Apr 28, 2017 10:10 am

WOW! Are you spraying varnish?
-Jim
Nothing says poor craftsmanship like wrinkles in your duct tape!

John R
Posts: 115
Joined: Wed Feb 11, 2015 3:04 pm

Re: Aussie Gentry

Postby John R » Fri Apr 28, 2017 7:04 pm

G/Day Jim that one was rolled on, the first few will be rolled on using a 5" foam roller works well and not messy, depends on the finish i keep getting is whether i spray the last coat,only about 6 more coats Roberta......John

neel thompson
Posts: 923
Joined: Fri Oct 01, 2010 2:33 pm
Location: Collegeville, Pa

Re: Aussie Gentry

Postby neel thompson » Sat Apr 29, 2017 5:05 am

Great work John. I would guess this is not your first varnish attempt. If you can get a finish like that with the roller, I would keep the sprayer on the shelf. Is there any way you could make a short video of your rolling process for us?

FFguy08
Posts: 64
Joined: Tue Sep 22, 2015 2:18 pm
Location: Greenwood, Indiana

Re: Aussie Gentry

Postby FFguy08 » Sat Apr 29, 2017 6:17 am

Greetings! I apologize if this is obvious, but the purpose of the Ash stem strip?... Is that cosmetic or is it intended to be a ware and tear piece that can be easily removed and replaced in the future? That's the first I've seen this, generally I see the cutwaters, so I'm curious! Thank you, Shane!
Shane 8)
Greenwood, Indiana

He who has the most toys, wins!
ZL1 = CharliZe
Tahoe 23 = OverKill (under construction), Blog www.facebook.com/projectOverKillTahoe23

John R
Posts: 115
Joined: Wed Feb 11, 2015 3:04 pm

Re: Aussie Gentry

Postby John R » Sat Apr 29, 2017 4:57 pm

G/day Neel yes my first ever attempt at varnish i did view a lot of YouTube videos to get some hints and i thought i would give it a crack as i could always cut it back
G/day Shane yes the ask is pure cosmetic and it is a pretty tough timber and i will put a small D or C mold down as well .........John

joshuab
Posts: 396
Joined: Sun Apr 26, 2015 4:10 pm
Location: southern oregon coast
Contact:

Re: Aussie Gentry

Postby joshuab » Sat Apr 29, 2017 5:32 pm

What brand of varnish? That looks stellar!!! :shock:
I cut twice and it's still too short :mrgreen:

John R
Posts: 115
Joined: Wed Feb 11, 2015 3:04 pm

Re: Aussie Gentry

Postby John R » Sat Apr 29, 2017 6:27 pm

G/day the varnish is Feast Watson Marine varnish good price and is UV and flexible .......John

John R
Posts: 115
Joined: Wed Feb 11, 2015 3:04 pm

Re: Aussie Gentry

Postby John R » Tue May 02, 2017 12:12 am

G/Day these are the products i am using to apply the varnish .........John
IMG_7103.jpg

IMG_7101.jpg

IMG_7102.jpg

FFguy08
Posts: 64
Joined: Tue Sep 22, 2015 2:18 pm
Location: Greenwood, Indiana

Re: Aussie Gentry

Postby FFguy08 » Tue May 02, 2017 7:46 am

Thanks!
Well, I really like it! That Ash stem strip really sets off the front of the boat! I like this approach better than a cutwater, so I may be "borrowing" this little customization! :D
Shane 8)
Greenwood, Indiana

He who has the most toys, wins!
ZL1 = CharliZe
Tahoe 23 = OverKill (under construction), Blog www.facebook.com/projectOverKillTahoe23

John R
Posts: 115
Joined: Wed Feb 11, 2015 3:04 pm

Re: Aussie Gentry

Postby John R » Tue May 02, 2017 6:37 pm

G/Day Shane yes i had made cutwater but i think the bow shape is to modern for it so i choose the Silver Ash, just make sure you have it wet i put it between the 2 trailer guards with a small rope in the middle on it pulling it down when it was raining here and it kept the bent shape so went down the stem well or steam it .........John

John R
Posts: 115
Joined: Wed Feb 11, 2015 3:04 pm

Re: Aussie Gentry

Postby John R » Fri Jun 02, 2017 4:57 pm

G/Day well weather here is getting colder and my days now for applying varnish, but made a progress the boat is now officially named, 3 more coats of varnish then it is flip time i sent a block in and other engine parts to get chemically cleaned so as to use for the mount set up ....John
IMG_7141.jpg

IMG_7139.jpg

IMG_7140.jpg


Return to “Power Boats”

Who is online

Users browsing this forum: No registered users and 17 guests