Laminating frames

See: "Useful Information and Suppliers" for a list of lumber and plywood suppliers. Also see: "Wood & Plywood Information". Both located in the left-hand column of the Home page.

Moderator: Bill Edmundson

Posts: 88
Joined: Mon May 08, 2017 5:51 pm

Re: Laminating frames

Post by ToddM »

DrBryanJ wrote:Todd: The description in the bill of materials say 2". It also says all sizes are nominal unless specified net, so he can use actual size down to 1 and 1/2".
And, it seems that there may be bonding issues with white oak and epoxy? There is a thread about it here on the Glen-l forum: ... 94#p192394

Posts: 2438
Joined: Thu Nov 10, 2011 8:48 am
Location: Lafayette, IN

Re: Laminating frames

Post by hoodman »

All my frames and longitudinals are white oak/epoxy. No problems yet. Just make sure your glue joints are roughed up with 80 grit paper. All test joints have failed in the wood.

Building a Geronimo......!

Posts: 36
Joined: Sun May 13, 2007 4:15 am
Location: Alton, IL

Re: Laminating frames

Post by rblevens »

thanks all

Post Reply

Return to “Wood and Plywood”