See: "Useful Information and Suppliers" for a list of lumber and plywood suppliers. Also see: "Wood & Plywood Information". Both located in the left-hand column of the Home page.
Moderator: Bill Edmundson
- Posts: 88
- Joined: Mon May 08, 2017 5:51 pm
DrBryanJ wrote:Todd: The description in the bill of materials say 2". It also says all sizes are nominal unless specified net, so he can use actual size down to 1 and 1/2".
And, it seems that there may be bonding issues with white oak and epoxy? There is a thread about it here on the Glen-l forum:
https://www.glen-l.com/phpBB2/viewtopic ... 94#p192394
- Posts: 2434
- Joined: Thu Nov 10, 2011 8:48 am
- Location: Lafayette, IN
All my frames and longitudinals are white oak/epoxy. No problems yet. Just make sure your glue joints are roughed up with 80 grit paper. All test joints have failed in the wood.
- Posts: 36
- Joined: Sun May 13, 2007 4:15 am
- Location: Alton, IL