pvc drain tubes

Designs for inboard or outboard power

Moderator: BruceDow

User avatar
svenole
Posts: 999
Joined: Mon Sep 21, 2009 7:49 am
Location: WISCONSIN
Contact:

pvc drain tubes

Postby svenole » Fri Sep 08, 2017 10:11 am

I'm using pvc pipe for my drain tubes ...can I use epoxy to seal and glue them in?

User avatar
hoodman
Posts: 1057
Joined: Thu Nov 10, 2011 8:48 am
Location: Lafayette, IN

Re: pvc drain tubes

Postby hoodman » Sat Sep 09, 2017 7:48 am

I'm doubting that epoxy will stick to PVC. It doesn't bond well to most plastics. Maybe 3M 4200 is a better choice?

Adrock1
Posts: 141
Joined: Tue Jan 26, 2016 8:28 am
Location: Greenville SC

Re: pvc drain tubes

Postby Adrock1 » Wed Sep 13, 2017 4:41 am

I've seen people do it with epoxy but only after roughing up the epoxy with a coarse grit sandpaper paper to ensure a good mechanical bond. Even with a good mechanical bond though, im not certain it would prevent all water intrusion.

User avatar
Mr Hot Rod
Posts: 935
Joined: Thu Mar 03, 2005 2:40 pm
Location: Chelsea, Quebec, Canada
Contact:

Re: pvc drain tubes

Postby Mr Hot Rod » Wed Sep 13, 2017 11:05 pm

Epoxies don't adhere well to many plastics because these surfaces are too smooth to allow a mechanical bond. One of the Gougeon Brothers' User Guides recommends cleaning the pipe with the correct cleaner for that type of pipe and applying a thin coating of ABS/PVC cement. Once the cement has completely dried, apply the epoxy over it.

See Bonding Plastics, page 13 :

____________________
Paul Kane
Kane Custom Boats Ltd.
Chelsea, Quebec

Building the Glen-L Hot Rod : http://www.kanecustomboats.com
Glen-L Hot Rod build thread
Kane Custom Boats YouTube channel
Glen-L Boat Video Directory


Return to “Power Boats”

Who is online

Users browsing this forum: Bing [Bot] and 18 guests