Bearing Rings - Sabotina

Dinghies, day sailers, world cruisers. Many small sailboats make ideal rowboats or low-speed power boats.

Moderator: BruceDow

Post Reply
curtJ
Posts: 3
Joined: Thu Jul 05, 2018 2:15 pm

Bearing Rings - Sabotina

Post by curtJ »

Hi All,
I'm looking for something I can use for the mast bearing rings on my soon to be complete Sabotina. The Sabotina is the 8 foot sailboat with the 13 foot mast. I've searched West Marine and haven't had any success. Any suggestions?
Thanks,
Curt

User avatar
Roberta
Posts: 6737
Joined: Tue Jul 31, 2007 5:23 pm
Location: East Troy, Wisconsin

Re: Bearing Rings - Sabotina

Post by Roberta »

Maybe Gayle at Glen L will chime in with info on this. Or another sailboat builder.

Roberta
Roberta "Queen of the Boat Builders"
Built Zip "Oliver IV", Super Spartan "Jimmy 70", and Torpedo "The Glen L".

User avatar
Jimbob
Posts: 811
Joined: Thu Jul 25, 2013 1:07 pm
Location: Sacramento, CA

Re: Bearing Rings - Sabotina

Post by Jimbob »

You might want to give Downwind Marine in San Diego, CA a call. I have purchased items from them and they are very helpful on the phone.
They also have a website.
Jim
Jim Neeley
Building a Barrelback in Sacramento, CA
viewtopic.php?f=15&t=28089#p172969

curtJ
Posts: 3
Joined: Thu Jul 05, 2018 2:15 pm

Re: Bearing Rings - Sabotina

Post by curtJ »

Thanks Roberta, Thanks Jimbob. I asked Glen-L directly about the hardware kit I bought and the bearing rings as called for their plans. I'll try Downwind Marine and see what they have. I guess I can test the boat and sail without this bearing and see if the boom will swivel the mast in its current state.

User avatar
Milhouse
Posts: 570
Joined: Tue Mar 08, 2016 8:03 am
Location: San Diego, CA

Re: Bearing Rings - Sabotina

Post by Milhouse »

Curt - Any pics of the boat?
Jim
16' Ski Boat Restoration
17' Overnighter Sloop

I'd rather have a $h!tty meal than an $h!tty resume because a totally awesome resume will feed me steak one day - Steve Poltz

Post Reply

Return to “Sailboats”