Glen-L.com

My ply scrambler plans are chopped at the bottom. On page 2 of 4 the lower left gives the distance from C/L for the skegs. I can't tell for sure what their suposed to be. Any help? I sure am glad glen L got a hold of Ken's plans. I almost had a heart attack when I found out I couldn't buy the plans I'd been looking at for more than a year. Anyway,This boat is a great build, I'm really having alot of fun with it.

It may not be cut off--Ken uses a symbol for CL that sort of looks like an ampersand (&). Here is what it says:
2"X2"X1/4" - 6061 Alum "T"
Skeg - 2 RQD - End 12" from
Transom, 4' long (not at CL)
10" each side of CL

I believe what he means is that you are going to attach two skegs 10" on either side of the centerline (CL symbol). They are 4' long and end 12" from the transom. Hope that helps and makes sense!

If it is cut off--send me an email and I'll send you another page, okay--we can't have that....

_________________
Gayle Brantuk
Vice President
Glen-L Marine
Visit our Blog & Create Your Own!

Thank you Gayle, that cleared it up. I couldn't tell weather it was 10 in. or 18. everything else on the plans is fine. I'll start planking in a couple days, and I don't see anything else to hold me up.