Fire Tug Boat

Topics not covered by another category.

Moderator: Bill Edmundson

Post Reply
User avatar
leakcheck
Posts: 2950
Joined: Mon Nov 17, 2003 3:01 pm
Location: Lander Wyoming

Fire Tug Boat

Post by leakcheck »

hi Guys, (and Bill)

I am going to turn my tug into a fireboat for the 4th, what type of 12v dc pump should I use. Being a plumbing I could probably rig up a great submersible but I have no idea how to get 240V to it! ...I have no experience with any battery operated pumps. Any help would be great!

Thanks

Steve

upspirate

Re: Fire Tug Boat

Post by upspirate »


User avatar
Bill Edmundson
Posts: 11865
Joined: Wed Nov 23, 2005 6:45 am
Location: Birmingham, AL, USA
Contact:

Re: Fire Tug Boat

Post by Bill Edmundson »

Steve :roll:

Pressure is as important as capacity. You'll want to clear the rim, I mean gunwale. That's kind of like you need to do at 3 a.m. :lol:

Bill
Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build

User avatar
leakcheck
Posts: 2950
Joined: Mon Nov 17, 2003 3:01 pm
Location: Lander Wyoming

Re: Fire Tug Boat

Post by leakcheck »

Sure NOW YOU TELL ME Bill...after all these years i just thought it was normal that I P'd on my toes!
Steve

User avatar
leakcheck
Posts: 2950
Joined: Mon Nov 17, 2003 3:01 pm
Location: Lander Wyoming

Re: Fire Tug Boat

Post by leakcheck »

In this case, pressure is probably much more important than capacity..I can run six or eight 3/8" lines from a 3/4 inch pump and should have plenty of volume if I can get the pressure up a bit. Won't need it for long..just long enough to soak the reviewing stand!
Steve

User avatar
Bill Edmundson
Posts: 11865
Joined: Wed Nov 23, 2005 6:45 am
Location: Birmingham, AL, USA
Contact:

Re: Fire Tug Boat

Post by Bill Edmundson »

Steve

If you just want a short blast, an air pressurized tank might be the ticket for distance. That is how the "Soaker" waterguns work.

Bill
Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build

Cranky Badger
Posts: 268
Joined: Mon Feb 02, 2009 12:06 am
Location: BC coast

Re: Fire Tug Boat

Post by Cranky Badger »

Just to take your question in a bit of a different direction, a two-stroke portable pump might be the way to go. A used one will probably cost you less than installing a 12V marine unit and will be self-contained. Since it's for a temporary installation, you ought to be able to sell it for what you paid for it, and it's made to do that specific job.

To satisfy the DIY mindset that brings us here in the first place, you could build a baffled box to kill the noise so long as air and heat are addressed.



Anyway, no more cents from me, that's both of 'em...
-Brian

"Do or do not. There is no try."
- Yoda

Trackhappy
Posts: 1412
Joined: Wed Feb 17, 2010 5:42 pm
Location: Sunshine Coast, Queensland, Australia. Building Gentry.

Re: Fire Tug Boat

Post by Trackhappy »

Rent a Honda firefighter pump for the day!!! At'll soak em :twisted:
By the time I have built a boat, I'll be ready to build a boat....

User avatar
psychobilly
Posts: 1083
Joined: Wed May 12, 2010 3:07 am
Location: Tomball, TX

Re: Fire Tug Boat

Post by psychobilly »

That's what I was gunna say.... Go to your rental center and rent a sump pump. WET T SHIRT CONTEST!!!!!!! LOL

User avatar
leakcheck
Posts: 2950
Joined: Mon Nov 17, 2003 3:01 pm
Location: Lander Wyoming

Re: Fire Tug Boat

Post by leakcheck »

Wait...I forgot to rremind you ... I am in WYOMING..everyone has a gun! and it will be the 4th of July and the public drinking ban is lifted for the day...I don't want to get myself shot..I just want it to be CUTE!...I'm thinking that and the puppies I fill the tug with will be a babe magnet!
Steve
:lol:

But...the tee-shirt thing is kinda interesting.. :? 8)

John K
Posts: 1560
Joined: Thu May 18, 2006 5:19 am
Location: AL

Re: Fire Tug Boat

Post by John K »

Leakcheck I was going to suggest a battery operated sump pump, but was beat to it.

Wet t shirt in Wyoming. LOL

User avatar
Lowka53
Posts: 1938
Joined: Fri May 14, 2010 11:47 pm
Location: Ogden, Utah-Jubilee build
Contact:

Re: Fire Tug Boat

Post by Lowka53 »

where in Wyoming I'm about a hour or two away from the boarder
Don't be afraid to attempt anything. You might surprise your self in the attempt.
http://www.facebook.com/Home.Made.Boat.Building
Bon Voyage-"Wild Flower" 40' house boat being built
14' Mr John-being built
32' Supper Huck-in design

Rod H

User avatar
leakcheck
Posts: 2950
Joined: Mon Nov 17, 2003 3:01 pm
Location: Lander Wyoming

Re: Fire Tug Boat

Post by leakcheck »

Lander, Wyoming!

That wash down pump looks about the best The sumps pump volume but not pressure...I will try one out and see how she shoots...might even send pics!
Steve
:lol: :lol:

User avatar
Bill Edmundson
Posts: 11865
Joined: Wed Nov 23, 2005 6:45 am
Location: Birmingham, AL, USA
Contact:

Re: Fire Tug Boat

Post by Bill Edmundson »

Steve

I think the wash downs look like the best option, also.

Bill
Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build

upspirate

Re: Fire Tug Boat

Post by upspirate »

Steve,Harbor freight has a long ,brass,sweeper nozzle like this that might be cute to use somehow....I couldn't find it on their web site,but saw it in tier store today.

http://www.thegoodyard.com/Mintcraft-6I ... M2VBU4.htm

Post Reply

Return to “Miscellaneous”