Glen-L.com

I wish to apologize for my terrible offense in putting my Squirt Jet on the small outboard page. Here a a couple of pics.

Pictures always make me feel better.

Bill

_________________
Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build

Here are some more pics.

Don't worry about it. This seems to be taking place at a more frequent pace. Your post was properly placed in the small boat section if the posts applys to hull construction. I take it that this was behind the scenes? If so please foward your chastizing to any moderator. We do not allow such goings on.

I wouldn't worry about it.....your pics are of a small outboard design that you have changed somewhat!!!

People that have been following your other threads know where to find you

_________________
Boat building can best be defined as an endless series of
tragedies obscured by the occasional miracle, followed by a good bottle of beer.

Don't Dream Your Life, Live Your Dream

But FWIW, and for anyone that takes it upon themselves to badger of the least amount is still not tolerated in any form, in open format or using the privilages that the forum allows such as the private messenging feature.

very true Oyster

_________________
Boat building can best be defined as an endless series of
tragedies obscured by the occasional miracle, followed by a good bottle of beer.

Don't Dream Your Life, Live Your Dream

nice boat no matter where it is. someday if I ever fiinish the one i have now i would like to build the squirt with the jet drive so keep the pictures coming.

_________________
John Amundsen
Monte Carlo
Winter Haven, FL

Maybe it will be done by G6 and maybe not.

I had just sent a note to Oyster. I would never seriously put anyone down. I was having quite a laugh about the whole thing. And you're right Pirate. They certainly have my number.

This Topic is simple and specific for all boats that have been modified to install a jet-ski motor and pump.
Most of which have been 3 basic hull designs.
All the modifications from plans etc. categorized into one simple place....
I remember how it was when I modified my TNT, before this slot was established, a lot of time searching for info.

I was just wondering where the web-master is to keep these posts categorized? After this category was formed all posts dealing with this type construction were automatically placed here.

_________________
THE FRAUD WILL NOT GO AWAY..9-11 WAS AN INSIDE JOB...
http://www.youtube.com/watch?v=hZEvA8BCoBw

http://s147.photobucket.com/albums/r302 ... rd_photos/

I think you should buy one of these and attach the "small outboard" to your boat in an obvious place, then re-post ..
http://findtoyoutboardmotors.com/light- ... motor-new/

_________________
By the time I have built a boat, I'll be ready to build a boat....

Maybe I could put one of my smaller outboards on the transom just for good measure. After all, One side of my garage is filled with outboards from 7 1/2 to 85 HP.

Well, I never!!!

I reckon Gertrude needs to come visit you and give you a hand resolving this matter once and for all!!!!

_________________
Dave

My Riviera build - the Midnight Cry Project

Video of Midnight in Action
Blog

Few things in the world measure up to the thrill and satisfaction of boating in a boat that you built.

Dave, our resident enforcer!!!

_________________
Boat building can best be defined as an endless series of
tragedies obscured by the occasional miracle, followed by a good bottle of beer.

Don't Dream Your Life, Live Your Dream

AHH I wouldnt worry about it too much as Gertrude is getting old.

_________________
John Amundsen
Monte Carlo
Winter Haven, FL

Maybe it will be done by G6 and maybe not.