Mixing hardener

Problems, how to use. Also see: "EPOXY", in the left-hand column of the Home page.

Moderators: Bill Edmundson, ttownshaw

Post Reply
Steve S
Posts: 238
Joined: Mon May 06, 2013 1:35 pm
Location: Big Fish Lake, MN.

Mixing hardener

Post by Steve S »

I was consolidating stuff in my garage and I poured two of my Silver Tip Epoxy hardeners into one bottle. Then I noticed one was slow hardener and one was fast hardener. :oops: They both have the same mix radio with the resin. Will this cause me any trouble the next time I use it?

Thanks for the help

Steve S
Squirt build

User avatar
Bill Edmundson
Posts: 11890
Joined: Wed Nov 23, 2005 6:45 am
Location: Birmingham, AL, USA
Contact:

Re: Mixing hardener

Post by Bill Edmundson »

Steve

I think it's OK. But, I'm not sure.

Bill
Mini -Tug, KH Tahoe 19 & Bartender 24 - There can be no miracle recoveries without first screwing up.
Tahoe 19 Build

JimmY
Posts: 991
Joined: Sat Jul 30, 2016 11:08 am
Location: Brighton, MI

Re: Mixing hardener

Post by JimmY »

From the System 3 website: "Use either a slow or fast hardener or blend the two hardeners for even more flexibility in working time."

So, you now have medium hardener! :D
-Jim
Nothing says poor craftsmanship like wrinkles in your duct tape!

Steve S
Posts: 238
Joined: Mon May 06, 2013 1:35 pm
Location: Big Fish Lake, MN.

Re: Mixing hardener

Post by Steve S »

Thanks for the help. This is indeed a good web site. :D
Squirt build

Post Reply

Return to “Epoxy”