June 29, 2004
Re: 10' Imp
This is the 5th Glen-L boat I have completed.
Four photos are enclosed showing the progress stages.
The outer skin is a marine plywood, using 1/4" on the sides, 3/8" on the bottom and 3/4" for the transom. The chines, sheers and floor battens are ash. The seats are 1/4" ply faced with 3/4" mahogany. The bumper on the outer edge of the sheer is 1" nylon rope attached with flat head stainless steel screws every 4".
It was a great project and it will get a lot of use as a skiff.
Warren C. Lyon