#703 a 17' deep vee cruiser Build in PLYWOOD

Trailerable cruiser plans

Length overall 17'-0"
Beam 7'-6"
Hull draft 11"
Hull depth 3'-4"
Hull weight (approx.) 750 lbs.
Height overall 5'-9"
Cabin headroom 3'-10"
Cockpit size 6' x 6'-6"
Sleeping accommodations 2
Hull type: Full length deep vee with lift strakes, approx. 18o deadrise at the transom, developed for sheet plywood planking.
Power: Single or twin long shaft outboard motor to 135 hp total. Single stern mounted inboard motor to 500 lbs., connected to an outdrive.
Can the hull be extended or shortened? Yes. Up to 10% by re-spacing the frames from the aft end of the stem to the transom a proportional amount. We do not recommend increasing the beam.
Trailer: Designed for use with Glen-L Series 1700 boat trailer plans.

Photographs Bill of Materials Return

Glen-L marine designs / / Boat plans for the home builder