Lazy Daze

#802 a 23' trailerable sedan cruiser Build in PLYWOOD




Characteristics
Length overall 22'-9"
Length waterline 20'-0"
Beam 7'-11"
Hull draft 12"
Displacement 3573 lbs.
Hull weight (approx.) 1500 lbs.
Hull depth 4'-4"
Freeboard forward 3'-3"
Freeboard aft 2'-3"
Height overall 6'-11"
Headroom (deckhouse) 6'-1"
Headroom (trunk cabin) 4'-8"
Cockpit size 5' x 6'
Fresh water capacity 15 gals.
Sleeping accommodations 2-4
Hull type: Vee bottom hard chine hull developed for sheet plywood planking.
Power: Single or twin short shaft outboard motors. Long shaft motors can be used if transom modified. Optional stern mounted inboard motor to 600 lbs. connected to an outdrive.
Can the hull be extended or shortened? Extended: No. Can be shortened up to 10% by re-spacing the frames from the aft end of the stem to the transom a proportional amount. We do not recommend increasing the beam.
Trailer: Designed for use with Glen-L Series 3800 boat trailer plans.

Photographs Bill of Materials Notes Return


Glen-L marine designs / www.glen-l.com / Boat plans for the home builder