a 44' aft cabin motor yacht Build in

Length overall 43'-11"
Length waterline 39'-0"
Beam 15'-2"
Hull draft 3'-0"
Displacement 30,600 lbs.
Freeboard forward 6'-1"
Freeboard aft 6'-1"
Hull depth 9'-1"
Height overall 16'-0"
Headroom 6'-3" to 6'-7"
Fuel capacity 450 gals.
Fresh water capacity 200 gals.
Sleeping accommodations 6
Hull type: Hard chine hull with built-in spray deflector/hull stabilizer, convex bulbous deep vee entrance and flaring topsides forward, and modified vee aft with flatter sections for stability and lower power requirements. Hull intended for cold-molded multi-diagonal wood or plywood planking (thickness of 1 1/4" on bottom, 1" on sides), or "one-off" fiberglass hull construction.
Power: Twin inboard in-line engines, either gasoline or diesel powered. Single engine optional, but not detailed. Recommended practical speed range is 15 to 22 knots, although speeds to approximately 28 knots are possible.
Can the hull be extended or shortened? Yes. Up to 10% by re-spacing the frames from the aft end of the stem to the transom a proportional amount. We do not recommend increasing the beam.

Photographs Bill of Materials:
Fiberglass / Plywood
Notes Return

Glen-L marine designs / www.glen-l.com / Boat plans for the home builder