Odyssea

#888
#889
a 36' traditional trawler yacht Build in
FIBERGLASS
or PLYWOOD




Characteristics
Length overall 35'-8"
Length waterline 31'-3"
Beam 13'-9"
Hull draft 3'-3"
Displacement 17,400 lbs.
Freeboard forward 6'-6"
Freeboard aft 3'-3"
Height less mast 14'-10"
Headroom 6'-3" min.
Deckhouse size 8'-0" x 10'-0"
Boat deck size 13'-0" x 15'-0"
Fuel capacity 240 gals. (450 opt.)
Cruising range approx 500 miles (240 gals. fuel)
Fresh water capacity 220 gals.
Sleeping accommodations 6
Hull type: Semi-displacement hard chine hull with efficient speed range to 10 knots. Build in plywood or "one-off" fiberglass. Bottom features deep bulbous forefoot with reverse curve at the chine. Plywood version: double diagonal plywood or solid wood planking on the bottom to a total thickness of 1", sheet plywood, double diagonal wood or plywood, or batten seam carvel planked sides to 3/4". Fiberglass version utilizes fiberglass planking or PVC foam sandwich construction. Balsa core can be used but not detailed in plans.
Power: Single diesel engine recommended of approximately 100 shp range with suitable reduction gear. Twin motors may be used but not preferred. Gasoline power is optional.
Can the hull be extended or shortened? Yes. Up to 10% by re-spacing the frames from the aft end of the stem to the transom a proportional amount. We do not recommend increasing the beam.

Photographs Bill of Materials:
Fiberglass / Plywood
Notes Return


Glen-L marine designs / www.glen-l.com / Boat plans for the home builder