#894 a 36' sedan cabin cruiser Build in PLYWOOD

Length overall 36'-0"
Length waterline 31'-8"
Beam 14'-1"
Hull draft 24"
Displacement 15,600 lbs.
Hull depth 5'-7"
Freeboard forward 4'-10"
Freeboard aft 3'-6"
Height overall 10'-7"
Headroom forward cabin 6'-3" min.
Headroom deckhouse 6'-4" min.
Cockpit size 6'-3" x 10'-6"
Deckhouse size 9'-6" x 10'-0"
Fuel capacity 200 gals.
Fresh water capacity 100 gals.
Sleeping accommodations 4-6
Hull type: Full planing hull with double diagonal planking on the bottom, and sheet plywood on the sides.
Can the hull be extended or shortened? Extend: No. Can be shortened up to 10% by re-spacing the frames from the aft end of the stem to the transom a proportional amount. We do not recommend increasing the beam.
Power: Single or twin inboard motors, centrally located with proper reduction gear.

Photographs Bill of Materials Notes Return

Glen-L marine designs / / Boat plans for the home builder