Eagle - Wood Bill of Materials
All lumber thickness should be purchased as standard lumberyard stock
finished as full as possible. Do NOT purchase any NET sized material unless the
lumber size is specifically noted on the plans or in the listing as NET. It is
a common mistake for builders to see a lumber thickness noted, for example
1" stock, thinking that this is the NET thickness. Such is not the case.
For example, lumber listed as 1" material (commonly referred to as
"four quarters" stock) will actually finish from 3/4" to
7/8" thick when purchased off the shelf. All widths, however, are NET or
actual width except as noted under the heading LUMBER & PLYWOOD. Types of
lumber are also noted under this heading, and can include Philippine and other
mahoganies, white oak, or dense vertical grain Douglas-fir.
ITEM |
NO.
PCS. |
SIZE |
LUMBER: |
Keel |
2 |
1" x 6" x 16' |
Skeg/stem cap (*) |
4 |
1/4" x 3" x 22' |
Skeg (inboard version)(*) |
1
1 |
3" x 10" x 14'
3" x 10" x 7' |
Skeg (I/O, Outboard version) |
1 |
2" x 8" x 12' |
Keel filler strake |
1 |
1-1/4" x 3" x 16' |
Sheer clamps |
4
1 |
1" x 1-1/2" x 24'
1" x 1-1/2" x 12' |
Rub rail |
4 |
1" x 1-1/2" x 24' |
Carling |
2 |
1" x 7" x 18' |
Coaming/cabin clamp |
2 |
1" x 9" x 18' |
Bulkhead framing, deck beams,
deck framing (*) |
40 random-random bd ft, 1" stock, some widths to
7"-see plans |
Floor timbers (*) |
20 random-random bd ft, 2" stock, some widths to
9"-see plans |
Motor stringers (inboard version) |
2 |
2" x 6" x 13' |
Motor stringers (I/O version) |
2 |
2" x 6" x 10' |
Motor stringer uprights (inboard & I/O versions) |
1 |
2" x 4" x 5' |
Motor stringer blocking (makes all from this piece) |
1 |
2" x 8" x 5' |
Stringers (outboard version) |
2 |
2" x 4" x 10' |
Transom cross brace (outboard ver) |
1 |
2" x 4" x 8' |
HULL PLANKING: |
Conventional Strip Planking Option - 3/4" min. net thick x
1" - 1-1/4" net wide sufficient to cover at least 250 sq. ft. of
surface area
OR
Epoxy Strip Planked/Veneer Laminated Method - 1/2" net thick x 3/4"
wide strip planking sufficient to cover at least 250 sq. ft. of surface area, +
1/8" net wood veneer 4" - 12" wide sufficient to cover at least
500 sq. ft. of surface area. |
PLYWOOD: |
Transom |
1 (inboard & I/O version)
3 (outboard version) |
3/4" x 4' x 8'
3/4" x 4' x 8' |
Stem, breasthook, knees (*) |
1 |
3/4" x 4' x 8' |
Bulkheads (*) |
1
1 |
1/2" x 4' x 8'
3/8" x 4' x 8' |
Decking |
3 |
1/2" x 4' x 8' |
(*) See plans and instructions for options |
Return
|